DISPLAY STYLE
PRODUCT FILTER
Reset
Show All
1:9 Hard drive/SSD Duplicators

The latest Addonics 1:9 HDD/SSD (Hard Disk Drive) Duplicator can copy as many as nine target drives from a single source, making this the ideal solution for production or data distribution applications. Addonics 1:9 HDD duplicator operates totally as a stand alone. There is no computer needed or complex software to operate. Set up is accessed via a LCM control panel on the front of the unit. Once configured, simply insert up to nine hard drives of equal or larger capacity than the master drive into the duplicator, load the master hard drive, lock the drive door and push the start button to start the copying process.

1:9 High Speed Hard drive/SSD Duplicators
1:9 M2/mSATA /SSD/HDD Duplicator PRO thumbnail

1:9 M2/mSATA /SSD/HDD Duplicator PRO

Model: M2MSHD9-2S
This 1:9 M2/mSATA /SSD Duplicator PRO allows you to copy from one source media onto as many as nine (9) target media at one time...the source and target drive can be M2 SATA SSD, mSATA SSD or 2.5" HDD/SSD...

  • Copy up to nine (9) M2/mSATA/mini SATA SSD or 2.5" SATA HDD/SSD with thickness up to 9.5 mm
  • Supported source media: M2/mSATA/mini mSATA SSD, 2.5" SSD, 2.5" and 3.5" HDD
  • Comes with ten (10) units of M2/mSATA flash drive kits
Jasper II 9SID, 1:9 3.5"/2.5" HDD/SSD Duplicator thumbnail

Jasper II 9SID, 1:9 3.5"/2.5" HDD/SSD Duplicator

Model: JD2-9SID A 1:9 high performance and expandable duplicator for 3.5"/2.5" SATA/IDE HDD or SSD. The duplicator makes copies from one to eleven (9) drives at one time with speed up to 260 MB/sec...

  • Copy from 1 to 9 2.5"/3.5" SATA or IDE hard drives / SSD
  • Copying speed up to 260 MB/sec.
  • Drive are added via removable drive tray
  • Drive sanitizing function
  • Two units can be daisy chained
1:9 High Speed HDD/SSD Duplicator PRO (HD9SITDRHS) thumbnail

1:9 High Speed HDD/SSD Duplicator PRO (HD9SITDRHS) - Discontinued

Discontinued and replaced by JD2-9SID The HD9SITDRHS model High Speed duplicator allows you to duplicate at the same high performance from one to nine hard drives.

  • Copy from 1 to 9 2.5"/3.5" SATA or IDE hard drives / SSD
  • High performance with minimum performance degradation from duplicating 1 to 9 drives
  • Drive are added via removable drive tray
  • Drive sanitization:
1:9 HDD/SSD HS Duplicator (HD9SNDXHS) thumbnail

1:9 HDD/SSD HS Duplicator (HD9SNDXHS)

The HD9SNDXHS model is a High Speed 1:9 HDD/SSD duplicator that maintains a steady high performance copying from one to nine 3.5" or 2.5" SATA hard drive or SSD.

  • Copy from one to nine 3.5" or 2.5" SATA HDD/SSD
  • Supports duplicating SATA HDD and SSD in either 3.5" or 2.5" form factors
  • Drives are added or removed without special tool
  • Drive sanitization