Flash Duplicator

Addonics offers a broad spectrum of duplicators to cover many common flash media such as M2 SATA SSD, mSATA SSD, CFast card, CF card, slim SATA card and micro SATA HDD/SSD. All Addonics duplicators are designed to be easy to use and are powered by a high performance RISC processor to ensure the data is tranferred as fast as the flash media allows. The Addonics Jasper II family of duplicators also offer the expansion flexibility. So instead of limited to certain # of targets that can be copied at one time. These duplicators can be connected together to copy to as many as 255 targets at one time and at a speed up to 260 Mb/sec on every target.

Operating as a stand alone appliance, Addonics flash media duplicators don't need to be connected to a computer. Simply load the source flash media into the source slot and the target flash media that is of equal or larger size to the target slot, push a button and the copying process will begin. There is absolutely no special software or any complicated set up procedures required.

Flash Duplicator Categories

Jasper II High Performance Duplicator

The new family of Addonics Jasper II Duplicator is one of the fastest and most advanced drive duplicators in the market.

High Performance
The Jasper II Duplicator can copy at a rate up to 260 MB/sec, more than twice the performance of most duplicators in the market. Whereas the performance of most duplicators declines with increasing load, ...

M2 / mSATA / 2.5" HDD/SSD Duplicator

The Addonics M2 / mSATA / 2.5" HDD/SDD Duplicator is designed for making identical mulitple copies of M2 SATA SATA, mSATA SSD or 2.5" HDD/SSD. You can mix and match these SSDs into the duplicator, thus making it a handy tool for transferring the content between these two different types of media. The equipment can also be used as a CF, CFast card, slim SATA SSD or micro SATA HDD/SSD dupli...

mSATA SSD / micro SATA HDD/SSD Duplicator

The Addonics mSATA and micro SATA SDD Duplicator is designed for making identical mulitple copies of micro SATA HDD/SSD or mSATA SSD from one media . You can mix and match these two types of SSDs into the duplicator, thus making it a handy tool for transferring the content between these two different types of media. The equipment can also be used as a CF or CFast card duplicator by using ...

M2 (NGFF) /SSD/HDD Duplicator

The Addonics family of M2/SSD/HDD duplicator is designed for making multiple copies of M2 (NGFF) SSD or 2.5" SATA HDD/SSD from a single master drive. Each duplicator comes bundled with a set of 2,5" M2 (NGFF) flash drive kit that turns a M2 (NGFF) card into a 2.5" SATA SSD. You can mix and match the M2 (NGFF) SSD, 2.5" SSD or hard drive into the duplicator, thus making it a handy tool for trans...

CF/CFast Duplicator

The CF or CFast Duplicator can duplicate CF or CFast cards in 1:4, 1:5 or 1:10, all with just a touch of a button. Our duplicators are designed to be easy to use and are powered with the latest technology to assure the best transfer speed that your media supports. Operating as stand alone systems, Addonics CF / CFast duplicators don't need to be connected to a computer. Simply load the source f...

ATA Flash duplicator

The Addonics family of ATA Flash duplicator is designed for making multiple copies of ATA Flash or CF cards using an optional PCMCIA-CF adapter, from a single master ATA Flash. You can mix and match the ATA Flash or CF card, thus making it a handy tool for transferring the content between the ATA Flash and CF card. There is no computer needed or complex software to operate. Just load the master...

USB HDD / Flash duplicator

This family of USB HDD / Flash duplicator is designed to operate as stand alone appliance for copying data from a single USB drive onto multiple USB drives at one time. The USB drive can be any Flash drive, hard drive, SSD, or flash media via Addonics' family of USB flash reader/writer. Comes in choice of models to duplicate ...