|
Home > Products
> External HDD
| External Hard Drive for 3.5" SATA hard drive |
|
|
Z Snap-In Mobile Rack with eSATA interface
The Z Snap-in Mobile Rack, the Snap-In Mobile Rack installed inside the Z family eSATA or eSATA/USB drive enclosure, is a convenient external removable hard drive system. When attached to system via USB 2.0, hard drives of any capacity can be conveniently added or remove from the system, similar to a tape cassette.
More Info... |
|
|
Z Snap-In Mobile Rack with eSATA/USB interface
The Z Snap-in Mobile Rack, the Snap-In Mobile Rack installed inside the Z eSATA or eSATA/USB drive enclosure, is a convenient external removable hard drive system. When attached to system via USB 2.0 or a hot swappable eSATA port, hard drives of any capacity can be conveniently added or remove from the system, similar to a tape cassette.
More Info... |
|
|
Diamond Cipher ExDrive for SATA hard drive with eSATA or eSATA/USB External Connection
The Diamond Cipher ExDrive Kit features the new generation of eSATA hard drive enclosures with the 256-bit AES hard encryption to ensure absolute data security should the drive get stolen or lost. Designed for accommodating any standard 3.5" SATA / SATAII hard drive, the Diamond Cipher ExDrive provides data transfer speeds approximately three times the maximum throughput of traditional drive enclosures utilizing the standard USB or Firewire interfaces through eSATA 3.0Gbps/1.5Gbps or USB 2.0 interface.
More Info... |
|
|
Z family eSATA / USB 2.0 Combo Drive Enclosure
The latest addition to the Z family is the eSATA/USB combo model featuring built in eSATA and USB 2.0 interface. These two interfaces allows you to connect any SATA hard drives to any computer equipped with a high speed eSATA port or the convenience of the USB port that is available in variety of computers.
More Info... |
|
|
Z family USIB Drive Enclosure for SATA devices
The Z family USIB model is equipped with a SATA - USIB connector on the back panel. Practically any SATA storage device can be turned into an external storage device. Once the storage device is installed into the drive enclosure, it can then be connected to any computer with USB 2.0, Firewire or eSATA interface by attaching different optional Addonics USIB interface cables.
More Info... |
|
|
|
Z family eSATA Drive Enclosure
The Z family eSATA model features a SATA to eSATA bridge connector on the back panel. It is an simple and economical solution for turning any SATA storage device into an external eSATA storage. By adding an optional IDE - SATA converter, practically any IDE storage device can also be installed into the Z family eSATA enclosure. The eSATA interface can be instantly converted to the ubiquitous USB interface by attaching the Addonics eSATA - USB adapter.
More Info... |
|
|
Diamond ExDrive for SATA hard drive with eSATA or eSATA/USB 2.0 External Connection
The Diamond ExDrive Kit features the new generation of eSATA hard drive enclosures using native eSATA interface for the highest performance possible today through an externally connected hard drive enclosure. Designed for accommodating any standard 3.5" SATA or IDE hard drive, the Diamond ExDrive provides data transfer speeds approximately three times the maximum throughput of traditional drive enclosures utilizing the standard USB or Firewire interfaces.
More Info... |
|
|
Saturn Cipher ExDrive for SATA hard drive (SCED)
One of the most advanced hardware based hard drive encryption solutions in the market for SATA/SATA II hard drive. It is easy to deploy and implement. There is no software to install and no training is required. Designed almost identical to the regular Saturn enclosure kit, the only difference is the additional encryption key and electronics in the Saturn Cipher drive enclosure. Optional 2.5" converter kits are available for the Saturn SATA enclosure to install 2.5" SATA hard drives.
More Info... |
|
|
Saturn ExDrive for SATA hard drive (SED)
The new generation of external hard drive kit with many improvements. The SED for SATA hard drive is the first hard drive kit in the market that enables any SATA hard drive to be used as an external hard drive via USB, Firewire, or External SATA connection. Optional 2.5" converter kits are available for the Saturn SATA enclosure to install 2.5" SATA hard drives.
More Info... |
|
|
External Drive Enclosure for SATA drives with USB 2.0/1.1 and Firewire 400 interface
A strong and stylish aluminum enclosure that turns any 3.5" SATA or SATA II hard drive into an external hard drive with fast and convenient USB 2.0/1.1 and Firewire 400 interface.
More Info... |
|
|
External Drive Enclosure for SATA drives with USB 2.0/1.1 interface
A strong and stylish aluminum enclosure that turns any 3.5" SATA or SATA II hard drive into an external hard drive with fast and convenient USB 2.0/1.1 interface.
More Info... |
| External Hard Drive for 3.5" IDE hard drive |
|
|
|
Z family USIB Drive Enclosure for IDE devices
The Z family USIB model is equipped with a IDE - USIB connector on the back panel. Practically any IDE storage device can be turned into an external storage device. Once the storage device is installed into the drive enclosure, it can then be connected to any computer with USB 2.0, Firewire or eSATA interface by attaching different optional Addonics USIB interface cables.
More Info... |
|
|
|
Diamond ExDrive for IDE hard drive with eSATA or eSATA/USB 2.0 External Connection
The Diamond ExDrive Kit features the new generation of eSATA hard drive enclosures using native eSATA interface for the highest performance possible today through an externally connected hard drive enclosure. Designed for accommodating any standard 3.5" SATA or IDE hard drive, the Diamond ExDrive provides data transfer speeds approximately three times the maximum throughput of traditional drive enclosures utilizing the standard USB or Firewire interfaces.
More Info... |
|
|
Saturn Cipher ExDrive for IDE hard drive (SCED)
One of the most advanced hardware based hard drive encryption solutions in the market for IDE hard drive. It is easy to deploy and implement. There is no software to install and no training is required. Designed almost identical to the regular Saturn enclosure kit, the only difference is the additional encryption key and electronics in the Saturn Cipher drive enclosure. Optional 2.5" converter kits are available for the Saturn IDE enclosure to install 2.5" or 1.8" IDE hard drives.
More Info... |
|
|
Saturn ExDrive for IDE hard drive (SED)
The new generation of external hard drive kit with many improvements. The SED for IDE hard drive enables any IDE hard drive to be used as an external hard drive via USB, Firewire, or External SATA connection. Optional 2.5" converter kits are available for the Saturn IDE enclosure to install 2.5" or 1.8" IDE hard drives.
More Info... |
|
|
|
External Drive Enclosure for IDE drives with USB 2.0/1.1 and Firewire 400 interface
A strong and stylish aluminum enclosure that turns any 3.5" hard drive or ATAPI DVD+/-R/RW, CDRW, DVD/CDRW, DVD or CD-ROM into a high speed external USB 2.0/1.1 and Firewire 400 storage device.
More Info... |
|
|
|
External Drive Enclosure for IDE drives with USB 2.0/1.1 interface
A strong and stylish aluminum enclosure that turns any 3.5" hard drive or ATAPI DVD+/-R/RW, CDRW, DVD/CDRW, DVD or CD-ROM into a high speed external USB 2.0/1.1 storage device.
More Info... |
|
|
Console ExDrive35
The Console ExDrive35 converts any 3.5" IDE hard drive into an external hard drive capable of connecting to any computer with an USB 2.0/1.1, Firewire/iLink, eSATA, or SATA port.
More Info... |
| External Hard Drive for 2.5" SATA hard drive |
|
|
Ruby Cipher ExDrive for SATA hard drive with eSATA or USB External Connection
The Ruby Cipher ExDrive Kit features the new generation of 2.5" eSATA hard drive enclosures with the 256-bit AES hard encryption to ensure absolute data security should the drive get stolen or lost. Designed for accommodating any standard 2.5" SATA / SATAII hard drive, the Ruby Cipher ExDrive provides data transfer speeds approximately three times the maximum throughput of traditional drive enclosures utilizing the standard USB or Firewire interfaces through eSATA 3.0Gbps/1.5Gbps or USB 2.0 interface.
More Info... |
|
|
Ruby ExDrive for 2.5" SATA hard drive with eSATA or eSATA/USB 2.0 External Connection
The Ruby ExDrive Kit features the new generation of eSATA hard drive enclosures using native eSATA interface for the highest performance possible today through an externally connected hard drive enclosure. Designed for accommodating any standard 2.5" SATA or SATA II hard drive, the Ruby ExDrive provides data transfer speeds approximately three times the maximum throughput of traditional drive enclosures utilizing the standard USB or Firewire interfaces.
More Info... |
|
|
|
Saturn Cipher ExDrive for SATA hard drive (SCED)
One of the most advanced hardware based hard drive encryption solutions in the market for SATA/SATA II hard drive. It is easy to deploy and implement. There is no software to install and no training is required. Designed almost identical to the regular Saturn enclosure kit, the only difference is the additional encryption key and electronics in the Saturn Cipher drive enclosure. Optional 2.5" converter kits are available for the Saturn SATA enclosure to install 2.5" SATA hard drives.
More Info... |
|
|
|
Saturn ExDrive for SATA hard drive (SED)
The new generation of external hard drive kit with many improvements. The SED for SATA hard drive is the first hard drive kit in the market that enables any SATA hard drive to be used as an external hard drive via USB, Firewire, or External SATA connection. Optional 2.5" converter kits are available for the Saturn SATA enclosure to install 2.5" SATA hard drives.
More Info... |
|
|
Jupiter ExDrive for 2.5" SATA hard drive (JEXD)
The Jupiter ExDrive Kit comes with all the important features that are required in a portable hard drive - rugged anodized aluminum housing, shock proof, light weight, and compact size. With the Jupiter ExDrive kit, any 2.5" SATA hard drive instantly becomes an external hard drive that can connect to computer via USB 2.0, Firewire/iLink, or eSATA.
More Info... |
| External Hard Drive for 2.5" IDE hard drive |
|
|
|
Saturn Cipher ExDrive for IDE hard drive (SCED)
One of the most advanced hardware based hard drive encryption solutions in the market for IDE hard drive. It is easy to deploy and implement. There is no software to install and no training is required. Designed almost identical to the regular Saturn enclosure kit, the only difference is the additional encryption key and electronics in the Saturn Cipher drive enclosure. Optional 2.5" converter kits are available for the Saturn IDE enclosure to install 2.5" or 1.8" IDE hard drives.
More Info... |
|
|
|
Saturn ExDrive for IDE hard drive (SED)
The new generation of external hard drive kit with many improvements. The SED for IDE hard drive enables any IDE hard drive to be used as an external hard drive via USB, Firewire, or External SATA connection. Optional 2.5" converter kits are available for the Saturn IDE enclosure to install 2.5" or 1.8" IDE hard drives.
More Info... |
|
|
Jupiter Cipher ExDrive for 2.5" IDE hard drive (JCEXD)
The Jupiter Cipher ExDrive Kit possesses all the new features of the Jupiter ExDrive with it's shock proof, light weight, and compact size drive enclosures while implementing our powerful new Addonics Cipher hardware encryption technology.
More Info... |
|
|
Jupiter ExDrive for 2.5" IDE hard drive (JEXD)
The Jupiter ExDrive Kit comes with all the important features that are required in a portable hard drive - rugged anodized aluminum housing, shock proof, light weight, and compact size. With the Jupiter ExDrive kit, any 2.5" IDE hard drive instantly becomes an external hard drive that can connect to computer via USB 2.0, Firewire/iLink, or eSATA.
More Info... |
|
|
Pocket ExDrive
Powered from your Notebook PC (through the USB or Firewire port), AC/DC adapter or from Internal Power Supply of your Desktop PC when used with optional Drive Cradle. Can be used as a Removable Hard Drive for Desktops.
More Info... |
| External Hard Drive for 1.8" IDE hard drive |
|
|
Jupiter 1.8" ExDrive Kit
Designed to read/write to or retrieve your valuable data from the small 1.8" Toshiba™ hard drive as an external hard drive or as a removable hard drive mounted inside the Addonics Jupiter ExDrive enclosure. Now you can connect the enclosure to USB, Firewire, or eSATA by attaching one of the Addonics USIB interface cables or use the enclosure like a tape cartridge with the Jupiter ExDrive drive cradle in you desktop system.
More Info... |
|
|
|
Saturn Cipher ExDrive for IDE hard drive (SCED)
One of the most advanced hardware based hard drive encryption solutions in the market for IDE hard drive. It is easy to deploy and implement. There is no software to install and no training is required. Designed almost identical to the regular Saturn enclosure kit, the only difference is the additional encryption key and electronics in the Saturn Cipher drive enclosure. Optional 2.5" converter kits are available for the Saturn IDE enclosure to install 2.5" or 1.8" IDE hard drives.
More Info... |
|
|
|
Saturn ExDrive for IDE hard drive (SED)
The new generation of external hard drive kit with many improvements. The SED for IDE hard drive enables any IDE hard drive to be used as an external hard drive via USB, Firewire, or External SATA connection. Optional 2.5" converter kits are available for the Saturn IDE enclosure to install 2.5" or 1.8" IDE hard drives.
More Info... |
| Console ExDrive35 - External Hard Drive |
|
|
|
Console ExDrive35
The Console ExDrive35 converts any 3.5" IDE hard drive into an external hard drive capable of connecting to any computer with an USB 2.0/1.1, Firewire/iLink, eSATA, or SATA port.
More Info... |
| Multi-Bay Drive Enclosures |
|
|
Z Disk Array
Utilizing the latest SATA technologies, the Z Disk Array offers the fastest external storage performance with data throughput up to 3Gbps via either a single eSATA or Multilane connection to a computer. By integrating the Addonics latest 2.5" Disk Array and a SATA Port Multiplier or Multilane connector into the the compact Z drive enclosure, up to 4 SATA hard drives or SSDs can be installed to the Z Disk Array via the 4 convenient removable drive trays.
More Info... |
|
|
Portable Dual Drive RAID enclosure
This new Portable Dual Drive RAID enclosure accomodates up to two 2.5" SATA hard drives into a small package that fits easily in your hand and connects to the computer using either eSATA or USB 2.0 connection. To enhance portability, the entire storage unit is designed to be powered by most USB ports.
More Info... |
|
|
Storage Rack with redundant or standard power supply
The Addonics Storage Rack is a 4U rack mount storage chassis designed to fit onto industrial standard computer rack. Designed to provide tremendous configuration flexibility, the Storage Rack is an ideal platform for creating a custom storage solution with multi-terabytes capability for video storage or editing, data archiving, uninterruptible storage, storage farm or any application that requires high performance or high storage capacity or both. Unlike many of the expensive proprietary storage solution in the market, the Storage Rack offer similar performance and capability at much lower cost per GB storage. In addition, the the Storage Rack can also be easily reconfigured, modified or upgraded at any time to meet your new application need without investing into new storage devices or new storage box.
More Info... |
|
|
Storage Tower II
The Storage Tower II features two standard 5 1/4" drive bays and an integrated power supply in a compact chassis with a stylish and functional front bezel. Similar to other Storage Towers in this family, the back panel on the ST II can accomodate varieties of Port Mulitpliers and connectors to meet a wide range of applications. When combined with the new 2x1 Hardware PM with eSATA and USB 2.0 connection, the Storage Tower II is an ideal external 2-drive RAID solution that can be moved around to different computers...
More Info... |
|
|
Mini Storage Tower
The Mini Storage Tower features increased portability, almost half the size and weight of it's predecessor. Comes with 4 standard 3 1/2" drive bays for 4 Serial ATA or IDE hard drives. Build a high performance (up to 3 Gbits/sec using SATA II) external storage system with various RAID configurations or a terabyte storage farm...mix SATA or IDE devices and convert them to USB 2.0, eSATA, Multilane connection...
More Info... |
|
|
Storage Tower
Comes with 4 standard 5 1/4" drive bays for 4 full height optical drives or 5 3.5" hard drives... build a high performance (up to 3 Gbits/sec using SATA II) external storage system with various RAID configurations or a terabyte storage farm...mix SATA, IDE or ATAPI devices and convert them to USB 2.0, eSATA, Firewire, or Multilane connection...
More Info... |
|
