Drive-mount 2-Port 6G HPM

This Drive-mount 2-port 6G HPM is a 2-drive hardware Port Multiplier designed to mount directly onto the back of any hard drive or SSD equipped with a standard combo 22-pin SATA power and data connector. The adapter does not occupy a PCI slot or requires any special mounting bracket to install. A second drive is connected to the device port of this HPM which then connects the two drives to a single SATA port. This is an economical solution to quickly create a set of mirror drives for drive redundancy or real time drive back up application. It is also a simple solution to increase the performance of your storage by stripping the two drives together. Or the two drives can be used as independent drives by connecting to a PM compatible SATA port.

 

Host side of the adapter Drive side of the adapter

 

 

Installing the adapter onto the back of a 3.5" hard drive   Connecting two drives to the adapter
 

 

Connecting two Mobile Racks to the adapter

  • Mount directly onto the back of a SATA hard drive or a Mobile Rack equipped with the standard 22-pin SATA power and data combo connector
  • Connect up two SATA hard drives or SSD to a single SATA port
  • Up to 6 Gbits/sec when connecting to SATA 3.0 port supporting this speed
  • Support RAID 1, 0, Large or individual drive settings
  • RAID setting via onboard jumpers
  • Individual drive setting requires connecting to PM compatible controller
  • Support hot swap
  • Compatible with any SATA hard drive or SSD
  • OS Support: depends on the attached SATA port

 

For a comparison of features on our family of Port Multiplier, please review the comparison chart in the PM tutorial page.

  • Connectors:
    • Drive side - 22-pin female combo SATA power and data connector
    • Host side - one SATA male host port and one SATA male device port
  • Full support for FIS-based switching and command-based switching SATA host controllers
  • Auto-negotiation support for 1.5Gbps, 3.0Gbps  and 6.0Gbps SATA speed
  • Compliant with SATA 1.0, 2.0 and 3.0 specification
  • LED Pin Headers for drive activity
  • Small 4-pin Molex power connector
  • Power consumption ~ 200 mA at 5V
  • OS independent
  • Maximum PCB dimension (W x L x H): ~ 23 x 75 x 21 mm ( .91 x 2.95 x .83 in.)
  • Weight: ~ 12 gm (0.42 oz)
  • Operating temperature and humidity: 0 - 60 °C, 5 - 90 % RH
  • Storage temperature and humidity: -20 - 70 °C, 0 - 95 % RH non-condensing

PRODUCTS

AD2HDDHP6G - (Drive-mount 2-Port 6G HPM )

AD2HDDHP6G    Content:    Drive mount 2-port 6G Harware Port Multiplier

For more detail information, please visit the following web page: http://www.addonics.com/products/host_controller/ad2hddhp6g.php

 


Price: 32.99

ACCESSORIES

AD4SA6GPX2 ( 6G 4-port SATA PCIe 2X controller)
>Content: 6G 4-port SATA PCI-Express 2 lanes controller, user guide
Price: 55.00
AD2SA6GPX1 (6G 2-port SATA PCI-Express Controller)
6G 2-port SATA PCI-Express Controller, low profile bracket, Driver CD, User guide,
Price: 39.00
AAHPISC18 (High performce 18" internal SATA cable)

AAHPISC18     Content:  High Performance 18" internal Serial ATA data cable

For more detail, visit product web page www.addonics.com/products/aahpsac.php

Price: 3.50
Datasheets
AD2HDDHP6G
Applies to: AD2HDDHP6G

- Drive-mount 2-Port 6G HPM

Userguides
Drivers
RAID Manager For 6G HPM
Applies to: AD252MSDR, AD2MSAHDR, AD2HDDHP6G

RAID Manager program for Dual mSATA adapter and flash drive and drive-mount 6G HPM.