Adding to the Addonics family of CF adapters, the Micro SATA CF adapter enables using of Compact Flash (CF) media as a direct replacement for the Micro SATA hard drive in the iPOD or the sub-Notebooks. Once installed, the CF media behaves like the Micro SATA SSD with low power consumption, fast access time and completely shock resistant.

Micro SATA CF Adapter with aluminum 1.8" hard drive frame kit (model: ADMSCF18)

Micro SATA to CF Adapter with open frame plastic bracket (model: ADMSCF)

• Enables Compact Flash (CFI/II) to be used like an ordinary 1.8" Micro SATA hard drive
• Designed with the same dimension and connector location of the 1.8" Micro SATA hard drive
• Choice of model with fully enclosed aluminum frame or open frame to meet different application requirements
• Can be used in Addonics external Micro SATA UDD or the internal Micro SATA UDD
• CF Card can be used as the primary bootable device containing the OS and applications.
• Transparent to the operating system and does not require any software drivers
• Supports any capacity of Compact Flash
• Support PIO, DMA, and UDMA mode
• Compatible with DOS, Windows 3.1, NT4, 98SE, Me, 2000, XP, Vista, Windows 7, Mac, Linux

• SATA II 3.0Gbps adapter
• 13-pin Micro SATA (signals and power) male connector on board
• Supports Compact Flash (Type I and Type II) or an IBM Micro drive
• Bootable
• Supports any capacity Compact Flash up to 2TB
• Compliant with Serial ATA 2.6
• Tag Command Queuing (Max 32 entries)
• Hot swappable
• SATA Power Save modes
• ATA/ATAPI PIO mode data transfer
• ATA/ATAPI UDMA data transfer rate of 150, 133, 100, 66, 44, 33, 25, 16.7 MB/s
• ATA/ATAPI-7 Streaming feature set
• Support DMA and UDMA mode
• 100% OS-transparent hardware bridge adapter to support PC, MAC and Linux, no driver required
• Dimensions: (W x L x H) - 54 x 78.5 x 5 mm
• Weight: 11g (.4oz)
• Power: 
  • +5V for model ADMSCF18 (comes with onboard 5V to 3.3V regulator)
  • +5V and +3.3V required for model ADMSCF
• Operating Temperature: 0 °C to + 75 °C
• Operating Humidity: 5% - 95% (non condensing)
• Storage Temperature: -40 °C to + 85 °C
• Storage Humidity: 5% - 95%
• Warranty: One Year
• RoHS compliant