DigiCopier III

1,2,3! That is how easy it is to copy a DVD or a CD with the Addonics family of DigiCopier! You can copy any DVD or CD without a computer. All you need to do is place the master into the source drive located on the top of the unit and a blank media into the rest of the other drives below the source drive. Close all the drive doors and start the copying process, and within a few minutes your DVD or CD is copied.

Designed to take advantage of the high performance SATA technologies, all Addonics Digicopiers are equipped with the latest high speed SATA optical drives that are available in the market. There are choices of four models to offer disc duplication of 1 copy, 3 copies, up to 7 copies or 11 copies at one time depending on your volume requirement. Each model is equipped with a user friendly LCM control module that provides a rich set of option configuration choices.

An eSATA port is also available on the back of each DigiCopier for attaching an optional external eSATA hard drive. With the additional of an eSATA hard drive, CD or DVD image can be copied onto the hard drive to use as a source. You can store as many images as needed depending on the compactly of your hard drive. By using the hard drive as a source, all optical drives in the Digicopier are now available to use as the target drive, further increase the copying capacity. So for the 1:1 DigiCopier, instead of making only 1 copy at a time, you can now double the volume by making 2 copies at a time when using the hard drive as the image source.

 

  • Copy up to three DVD or CD disc at one time
  • Operate as stand alone appliance. No computer required
  • User-friendly interface and intuitive message display on the LCM control module
  • High speed 24X SATA DVD/CDRW drive for maximum throughput
  • Support copying* of CD, DVD, or DVD dual layer disc
  • High-speed simultaneous recording
  • Copy per cycle completes in as little as 6 minutes or less for a 4.5G DVD source image when copying onto 16X DVD media.
  • Built-in eSATA port on the back for attaching an optional 3.5" or 2.5" eSATA hard drive to use as the source drive for storing disk images (.ISO format). When using the eSATA hard drive as the source drive, all optical drives in the unit can be used as target drives to increase copying capacity
  • Edit track feature collects audio tracks on a number of CDs and merges them onto a single CD compilation (or a partition on the optional external eSATA hard drive)
  • LCM control module provides a rich set of robust advanced configuration options
  • firmware update using DVD-ROM disc
  • 110/240V universal power supply for worldwide use

*Note: copy protected media may not duplicate successfully.

 

Model DGC7

Source and Destination Drives

24X+/8X/8X- DVD+/-R/RW/DL

Write Speed

DVD+R 24x
DVD+R (DL) 8x
DVD-R 24X
DVD-R (DL) 8x
DVD+RW 8x
DVD-RW 6x
DVD-RAM 5x
CD-R 48x
CD-RW 24x

Read Speed

DVD±R 16x
DVD±R (DL) 12x
DVD±RW 13x
DVD-ROM 16x
CD-ROMR 48x
CD-RW 40x
Read / Write Format DVD: DVD+R DL 8.5GB DVD+R 4.7GB DVD+RW 4.7GB DVD-R DL: 8.5GBDVD-R 4.7GB(closed session) DVD-RW 4.7GB (closed session) DVD-RAM DVD-Video
CD: CD-DA CD-ROM XA (m1, m2f1/m2f2) CD-R CD-RW Bootable CD Photo CD (single and multi-session) Video CD CD-Extra CD-Text CD-I FMV CD-Bridge
Access Time DVD-ROM: 145 ms typical (190 ms Limit)
DVD-ROM DL: 220 ms typical (300 ms Limit)
CD-ROM: 125 ms typical (180 ms Limit)
DVD-RAM: (Ver.2.2) 270 ms typical (400 ms Limit)

Power Supply:

320 watts Max

Power Source:

115/230 auto-sense AC/DC adapter

Product Weight:

21 lb (9.53kg)

Product Dimensions 
(W x D x H inches):

~ 7.5 x 16.7 x 17.2

Operating Temperature (°C) 0°C - 50 °C
Operating Humidity: 20% - 90%

Storage Temperature (°C)

0°C - 50 °C

Storage Humidity (RH)

10% - 90%

Warranty:

One Year


PRODUCTS

DGC3 - (1:3 DVD Duplicator)
DGC3 DigiCopier III - 1 to 3 Duplicator with 4 SATA optical drives installed. Operate as stand alone appliance with no computer required. LCM control module with user friendly interface. High speed 22X SATA DVD target drive for maximum throughput.

For more information, visit the following link
http://www.addonics.com/products/duplicator_burner/duplicator.asp
Price: 329.00

ACCESSORIES

Datasheets
DigiCopier III
Applies to: DGC3
Userguides