Home > Products > CD/DVD Duplicator with Burner > DigiCopier Series

1,2,3! That is how easy it is to copy a DVD or a CD with the Addonics family of DigiCopier! You can copy any DVD or CD without a computer. All you need to do is place the master into the source drive located on the top of the unit and a blank media into the rest of the other drives below the source drive. Close all the drive doors and start the copying process, and within a few minutes your DVD or CD is copied.

Designed to take advantage of the high performance SATA technologies, all Addonics Digicopiers are equipped with the latest high speed SATA optical drives that are available in the market. There are choices of three models to offer disc duplication of 1 copy, 3 copies or up to 7 copies at one time depending on your volume requirement. Each model is equipped with a user friendly LCM control module that provides a rich set of option configuration choices.

An eSATA port is also available on the back of each DigiCopier for attaching an optional external eSATA hard drive. With the additional of an eSATA hard drive, CD or DVD image can be copied onto the hard drive to use as a source. You can store as many images as needed depending on the compactly of your hard drive. By using the hard drive as a source, all optical drives in the Digicopier are now available to use as the target drive, further increase the copying capacity. So for the 1:1 DigiCopier, instead of making only 1 copy at a time, you can now double the volume by making 2 copies at a time when using the hard drive as the image source.

Click on images for detailed view

Features

• Choice of models for 1 to 7, 1 to 3, or 1 to 1 duplicator
• Operate as stand alone appliance. No computer required
• User-friendly interface and intuitive message display on the LCM control module
• High speed 22X SATA DVD target drive for maximum throughput
• Support copying of CD, DVD, DVD dual layer
• High-speed simultaneous recording
• Copy per cycle completes in as little as 6 minutes or less for a 4.5G DVD source image when copying onto 16X DVD media.
• Built-in eSATA port on the back for attaching an optional 3.5" or 2.5" eSATA hard drive to use as the source drive for storing disk images (.ISO format). When using the eSATA hard drive as the source drive, all optical drives in the unit can be used as target drives to increase copying capacity
• Edit track feature collects audio tracks on a number of CDs and merges them onto a single CD compilation (or a partition on the optional external eSATA hard drive)
• LCM control module provides a rich set of robust advanced configuration options (diagram of duplicator features can be viewed here) accessible via the
  • Configure CD/DVD burn speed
  • Auto verify/compare/prescan
  • Burn on the fly (or copy to hard drive first)
  • Disk At Once or Track At Once burn modes
  • DVD disc full/quick erase
• firmware update using DVD-ROM disc
• 110/220V universal power supply for worldwide use

Note: may not able to copy-protected DVD or CD.

Part number and Pricing

Model	Description and Package Content	Click shopping cart to check price and order online
DGC1	DigiCopier I - 1 to 1 Duplicator with 2 SATA optical drives installed Package content: Two 22X+/8X- Dual layer DVD+/-R/RW and 24X CDRW Duplicator, user manual	$209
DGC3	DigiCopier III - 4 to 1 Duplicator with 4 SATA optical drives installed Package content: Four 22X+/8X- Dual layer DVD+/-R/RW and 24X CDRW Duplicator, user manual	$339
DGC7	DigiCopier VII - 7 to 1 Duplicator with 8 SATA optical drives installed Package content: Eight 22X+/8X- Dual layer DVD+/-R/RW and 24X CDRW Duplicator, user manual	$529

Specifications

information provided in the tables above are for comparison purpose only