|
Home > Products
> Host Controller > SATA 4-port RAID controller
The Addonics SATA 4-Port RAID controller makes adding RAID
storage to any computers easy and affordable. It supports up to 4 Serial
ATA hard drives and can be configured as RAID 1, RAID 0, RAID 1+0, RAID
1+S or 4 individual drives. Together with the Addonics optional Disk
Array 4SA system, high performance and reliable data storage system
can be added to any computers at less than half of the cost of traditional
SCSI or IDE solution.
For more information on Serial ATA, please visit our tutorial
page
Click here for the 4 port SATA RAID5/JBOD PCI Controller.
Product Features
- 4 Internal Serial ATA ports
- High data throughput, up to 150 Mbytes/sec
(1.5Gbits/sec)
- Work with any Serial ATA drive
- Built-in RAID 0, RAID 1, RAID 1+0, RAID
1+ S support
- Use as a non-RAID controller for 4 individual drives
or as RAID controller
- Support large hard drives of 137 GB or greater
- Silicon Image chip set SiI
3114
- Upgradable firmware
- Fits standard Desktop case and low profile
systems
- Hot swap - device can be removed and added
without system shut down or restart
- simple plug and play
- compatible with DOS, Windows NT,
98SE, Me, 2000 and XP, Vista, Linux ( Kernel 2.4 or higher)
- List of Linux Distributions compatible with Addonics SATA Host Controllers
Model and Pricing
| Model |
Description and Package Content |
Click shopping cart to
check price and order online |
| ADST114 |
SATA 4-port RAID
controller
Package content: SATA 4-port RAID controller, 1 standard height
bracket, 1 low profile bracket, software CD, user guide |
$39.95  |
Click the following link for a complete listing of SATA
cables and brackets.
Specifications
- 4 Serial ATA interface ports
- Fully compliant with Serial ATA 1.0 specification
- Independent 256-byte FIFOs (32 bit*64 deep) per Serial
ATA channel for host reads and writes
- Compliant with 32-bit, 33/66 MHz PCI 2.2 host interface
- Integrated PCI DMA engines
- Build-in RAID 0, RAID 1, RAID 1+0 support
- RAID 0+1 (Mirrored-Stripping) combine both Striping and
Mirroring technologies to provide both the performance enhancements
that come from Striping and the data availability and integrity that
comes from Mirroring
- RAID 1+S (Mirrored-sparing) can
automatically replace the failed drive and rebuild the system when booting
HDD is failed
- Supports ATAPI commands
- Upgradable firmware
- Supports Spread Spectrum in receiver
- Compliant with PCI Specification, revision 2.2
- Temperature: Operating 0 to 70 degree C.
- Storage: -25 to 90 degree C.
- Humidity: Operating 20% to 80%
- Non Operating 15% to 90%
- Work under DOS, Windows NT,
98SE, Me, 2000 and XP, Vista, Linux ( Kernel 2.4 or higher)
- Dimension (W x D x H) - 125 mm x 19 mm x 63 mm.
- 1 year warranty
SATA data transfer rate is calculated at 10 bits=1 byte
System Requirement
- PC/AT or Compatible System
- One free PCI slot
- Pentium or greater
- Minimum 32 MB RAM
- 10 MB minimum free hard disk space
- One of the following operating systems: DOS, Windows NT,
98SE, Me, 2000, XP, Vista, Linux ( Kernel 2.4 or higher)
|
|
|
