Home > Products > Host Controller > 4-port SATA RAID 5 / JBOD PCI controller

The Addonics 4-port SATA RAID 5 / JBOD PCI controller makes adding the newest RAID features to any computer easy and affordable. It supports up to 4 Serial ATA hard drives and can be configured as RAID 1, RAID 0, RAID 1+0, RAID 1 + S, RAID5, JBOD or 4 individual drives. Together with the Addonics optional Disk Array 4SA system, high performance and reliable data storage system can be added to any computers at less than half of the cost of traditional SCSI or IDE solution.

For more information on Serial ATA, please visit our tutorial page

Click here for the 4 port SATA non RAID5/JBOD PCI Controller.

Product Features

• 4 Internal Serial ATA ports
• High data throughput, up to 150 Mbytes/sec (1.5Gbits/sec)
• Work with any Serial ATA drive
• RAID5/JBOD controller configuration possibilities
• RAID 0, RAID1, RAID 1+0, RAID 1+ S, RAID5
  • JBOD - combines individual drive into one large volume to show as one drive lette
• Use as a non-RAID controller for 4 individual drives or as RAID controller
• Support large hard drives of 137 GB or greater
• Silicon Image chip set SiI 3114
• Upgradable firmware
• Fits standard Desktop case and low profile systems
• Hot swap - device can be removed and added without system shut down or restart
• Simple plug and play
• Compatible with Windows NT, 98SE, Me, 2000, XP, Vista
• List of Linux Distributions compatible with Addonics SATA Host Controllers

Model and Pricing

Model	Description and Package Content	Click shopping cart to check price and order online
ADST114R5	4-port SATA RAID 5 / JBOD PCI controller Package content: 4-port SATA RAID 5 / JBOD PCI controller, 1 standard height bracket, 1 low profile bracket, software CD, user guide	$39.95

Click the following link for a complete listing of SATA cables and brackets.

Specifications

• 4 Serial ATA interface ports
• Fully compliant with Serial ATA 1.0 specification
• Independent 256-byte FIFOs (32 bit*64 deep) per Serial ATA channel for host reads and writes
• Compliant with 32-bit, 33/66 MHz PCI 2.2 host interface
• Integrated PCI DMA engines
• Build-in RAID 0, RAID 1, RAID 1+0, RAID 1+S, RAID 5, JBOD support
• RAID 0+1 (Mirrored-Stripping) combine both Striping and Mirroring technologies to provide both the performance enhancements that come from Striping and the data availability and integrity that comes from Mirroring
• RAID 1+S (Mirrored-sparing) can automatically replace the failed drive and rebuild the system when booting HDD is failed
• Supports ATAPI commands
• Upgradable firmware
• Supports Spread Spectrum in receiver
• Compliant with PCI Specification, revision 2.2
• Temperature: Operating 0 to 70 degree C.
• Storage: -25 to 90 degree C.
• Humidity: Operating 20% to 80%
• Non Operating 15% to 90%
• Compatible with Windows NT, 98SE, Me, 2000, XP, Vista
• Dimension (W x D x H) - 125 mm x 19 mm x 63 mm.
• 1 year warranty

SATA data transfer rate is calculated at 10 bits=1 byte

System Requirement

• PC/AT or Compatible System
• One free PCI slot
• Pentium or greater
• Minimum 32 MB RAM
• 10 MB minimum free hard disk space
• One of the following operating systems: Windows NT 4.0, 98SE, Me, 2000, XP, Vista