1:9 2.5" SSD/HDD HS Duplicator

The Addonics family of 2.5" duplicator is an economical hard drive duplicator solution with choice of models for copying from three up to as many as eleven 2.5" SATA hard drive or SSD. There is no computer needed or complex software to operate. Just open the doors on the drive bays, load your master hard drive to the source bay and other hard drives of capacity equal or larger into the target bays, lock the drive doors and push the start button to start the copying process.

 

About This Model

This 1:9 2.5" SSD/HDD HS Duplicator allows you to copy from one source media onto as many as nine (9) target media at one time. The source and target drive can be of either 2.5" SATA SSD or 2.5" SATA hard drive, a great solution for transferring content between 2.5" SSD and 2.5" hard drive. The high performance duplicator controller in this unit also ensures optimal performance in copying from one to nine targets. By adding other optional 2.5" flash drive adapters, the supported media can be expanded to include M2 (NGFF), mSATA, CFast and CF card. Designed with snap-In drive bay, drives are easily added or removed without any special tool, just like an ordinary cassette tape.


Illustration of loading the 2.5" SSD/HDD into the duplicator



  • Copy up to nine 2.5" SATA HDD/SSD with thickness up to 12.5 mm
  • Optional supported media: M2 (NGFF), mSATA, CFast or CF card with the following optional model of 2.5" flash drive kit - AD25M2SSD, AD25MSD, AD25CFASTD, AD25CFD
  • High performance with minimum degradation in copying from one to nine targets
  • Typical copying speed*:
Copying Speed
1 target 3 targets 5 targets or more
~ 105 MB/sec ~85 MB/sec ~ 80 MB/sec
  • Support any file system
  • Support maximum media capacity >3TB
  • Source and Destination drives are added or removed like tape cartridges from each drive bay with no special tool required
  • Drive sanitization:
    • SECURE ERASE - HDD duplicator sends a WIPE command to the hard drive. This command fills 00 string to entire HDD (this option may not be supported on certain SSD or flash media)
    • OVERWRITE - One pass, 3 passes and 7 passes 5220.22-M. The duplicator writes a string of pattern over the entire disk one time, three times or seven times. 5220.22-M is the DoD standard for drive sanitization
  • LCM control module provides a rich set of robust advanced configuration options (diagram of duplicator features can be here Full LCD console feature list)
  • Operate as a stand alone appliance. No computer or software needed

* The speed here is for reference only. The actual transfer rate varies depending on the speed of the source and destination drive


Components that make up the main unit

Storage Tower (ST9), 1:9 HDD High Speed Duplicator subsystem (HDU9SASHS), five (5) units of the Snap-In Double Drive (AE25SNAP2SA), power cord, user guide


  • Writing mode: Sector to Sector
  • Typical copying speed:
Maximum Copying Speed
1 taret 3 targets 4 targets or more
~ 105 MB/sec ~ 85 MB/sec ~ 80 MB/sec
  • Sturdy metal frame construction
  • Drives are added or removed just like VHS cassette without tools
  • LCD display with functional control panel
  • Two low noise high CFM ball bearing cooling fans
  • Power consumption: 15 - 150 Watts (varies depending on the media)
  • Integrated 500W universal AC 110/240V power supply
  • Dimension: ~ 7.5 x 17.25 x 17.2 in. (90 x 438 x 437 mm.)
  • Weight: ~ 23.93 lb (10.85 Kg)
  • Operating temperature and humidity: 0 - 50 degree C, 15% - 90% RH
  • Storage temperature and humidity: (-20) - 65 degree C, 0% - 95% RH non-condensing

Specification subject to change without notice

PRODUCTS

ACCESSORIES

AD25CFASTD (2.5" CFast hard drive kit)
Content: 2.5" CFast card hard drive kit with black color bracket, user guide. (Require removing the circuit board from the bracket to install or replace the CFast card. Good for permanent and secure media installation.)
Price: 24.95
AD25MSD (2.5" mSATA flash hard drive kit)
Content: 2.5" mSATA SSD hard drive kit.
Price: 24.95
AD25M2SSD (2.5" M2 Flash drive kit (black))
Content: 2.5" M2 (NGFF) SSD drive kit (black color)

Price: 24.95
AD25CFD (2.5" CF hard drive kit)
Content: 2.5" CF card hard drive kit with black color bracket, user guide. (Require removing the circuit board from the bracket to install or replace the CF card. Good for permanent and secure media installation.)
Price: 26.95