The new family of Addonics Jasper II Duplicator is one the fastest and most advanced drive duplicators in the market.
The Jasper II Duplicator can copy at a rate up to 260 MB/sec, more than twice the performance of most duplicators in the market. Whereas the performance of most duplicators declines with increasing load, the duplication speed on a Jasper II duplicator remains the same regardless of number of drives in the copying process.
Unlike traditional duplicator that is designed for a fixed number of targets, the duplicating capacity of a Jasper II Duplicator can be expanded by connecting multiple units together. So if you have three Jasper II duplicators with 3 targets, 11 targets and 19 targets, you can connect all three together to turn them into a 1:35 duplicators. Or you can connect two 1:11 Jasper II duplicators together to form a 1:23 duplicator.
up to 260MB/sec
Since the Jasper II Duplicator can be connected together, different type of media can be easily mixed in the duplication. For example, a Jasper II 3.5" drive duplicator can be connected to a Jasper II 2.5" drive duplicator which then connect to a mSATA duplicator. In this set up, a 3.5" source drive can be copied onto 2.5 drive or mSATA card all at the same time. To use different media as the source, you would just need to move the appropriate type of Jasper II duplicator to the beginning of the chain. So instead of having the Jasper II 3.5" drive duplicator as the first duplicator in the chain, you can either move the Jasper II 2.5" duplicator or the Jasper II mSATA duplicator to be the first unit in chain.
The scalability and the flexibility in using different media as source and target allows every Jasper II Duplicator to be used in all types of drive duplication and also ensure the longevity of your investment.
About this model
This Jasper II 19S is a 1:19 high performance and expandable duplicator for 3.5" HDD. The duplicator makes copies from one to nineteen (19) drives at one time with speed up to 260 MB/sec. Drives are loaded directly into the duplicator with no special tools required. It can also duplicate 2.5" HDD/SSD by using Addonics optional 2.5" - 3.5" drive adapter (Snap-In 25). The source or target drive can be either 3.5" or 2.5" SATA drive or SSD.
|Front view||Rear view|
3.5" SATA HDD is added directly into each drive bay without any special tool. Copying 2.5" SATA HDD requires using a 2.5" adapter (Snap-In 25). One 2.5" adapter is included in the package. Additional 2.5" adapters are required for making more copies of 2.5" HDD.
(1) The speed here is for reference only. The transfer rate varies depending on the speed of the source and destination drive. The slowest drive in the duplication will control the overall performance of the entire duplication