Jasper II 5SID

The new family of Addonics Jasper II Duplicator is one the fastest and most advanced drive duplicators in the market.

High Performance
The Jasper II Duplicator can copy at a rate up to 260 MB/sec, more than twice the performance of most duplicators in the market. Whereas the performance of most duplicators declines with increasing load, the duplication speed on a Jasper II duplicator remains the same regardless of number of drives in the copying process.

Expandable
Unlike traditional duplicator that is designed for a fixed number of targets, the duplicating capacity of a Jasper II Duplicator can be expanded by connecting multiple units together. So if you have three Jasper II duplicators with 3 targets, 11 targets and 19 targets, you can connect all three together to turn them into a 1:35 duplicators. Or you can connect two 1:11 Jasper II duplicators together to form a 1:23 duplicator.

High-Performance
up to 260MB/sec
Expandable Flexible

 

Flexibility
Since the Jasper II Duplicator can be connected together, different type of media can be easily mixed in the duplication. For example, a Jasper II 3.5" drive duplicator can be connected to a Jasper II 2.5" drive duplicator which then connect to a mSATA duplicator. In this set up, a 3.5" source drive can be copied onto 2.5 drive or mSATA card all at the same time. To use different media as the source, you would just need to move the appropriate type of Jasper II duplicator to the beginning of the chain. So instead of having the Jasper II 3.5" drive duplicator as the first duplicator in the chain, you can either move the Jasper II 2.5" duplicator or the Jasper II mSATA duplicator to be the first unit in chain.

The scalability and the flexibility in using different media as source and target allows every Jasper II Duplicator to be used in all types of drive duplication and also ensure the longevity of your investment.


About this model

This Jasper II 5SID is a 1:5 high performance and expandable duplicator for 3.5"/2.5" SATA or IDE HDD/SSD. The duplicator makes copies from one to five (5) drives at one time with speed up to 260 MB/sec. Drive is loaded into the duplicator via removable drive enclosure that accomodates both 3.5" or 2.5" drive. Comes with six (6) Diamond SATA enclosures and one Diamond IDE enclosure, the duplicator can be used to duplicate either IDE or SATA drives or a mix of both. The source or target drive can also be either 3.5" or 2.5" SATA or IDE drive. By using Addonics family of 2.5" flash drive kit, this duplicator can also be used to duplicator M2 SATA, mSATA, CFast, CF card, slim SATA SSD or 1.8" SATA HDD/SSD, making this one of the most flexible duplicators in the market. Together with the expandable capability, this duplicator practially fulfills majority of the storage media duplication needs.

 
Front view     Rear View
        

 

 

There are two types of Diamond drive enclosures - one for SATA HDD and another is for IDE HDD. Included in this duplicator are 4 Diamond SATA enclosure and 1 Diamond IDE drive enclosure. The Diamond drive enclosure is designed to support both 3.5" and 2.5" HDD. For installing 2.5" IDE HDD into Diamond IDE drive enclosure, a 44pin - 40pin IDE connector adapter, part # AA25IDE25, is required. This connector is not included in this duplicator

 

 

1:5 HDD Duplicator comparison chart

 
Performance

HDUSI5TDR: 100 - 55 MB/sec

HDSI5TDRHS: 105 - 85 MB/sec

HDUS5SNDX: 100 - 55 MB/sec

HD5SNDX HS: 105 - 85 MB/sec

100 - 55 MB/sec Maximum speed ~ 260 MB/sec
Performance does not decrease with increasing # of targets. 
Maximum speed ~ 260 MB/sec
Performance does not decrease with increasing # of targets
Expandable

No

No

No Yes by daisy chaining multiple Jasper II duplicators Yes by daisy chaining multiple Jasper II duplicators
Copying options          
From source To target (up to 5)          
3.5 SATA HDD 3.5" SATA HDD
Yes
Yes
Yes
Yes
Yes
3.5" SATA HDD 3.5" IDE HDD
Yes
NA
NA
NA
Yes
3.5" SATA HDD 2.5" SATA HDD/SSD
Yes
Yes (see note 4 below)
Yes (see note 4 below)
Yes (see note 4 below)
Yes
3.5" SATA HDD 2.5" IDE HDD/SSD
Yes
NA
NA
NA
Yes
3.5" IDE HDD 3.5" SATA HDD
Yes
NA
NA
NA
Yes
3.5" IDE HDD 3.5" IDE HDD
option (see note 1 below)
NA
NA
NA
 
3.5" IDE HDD 2.5" SATA HDD/SSD
Yes
NA
NA
NA
Yes
3.5" IDE HDD 2.5" IDE HDD/SSD
option (see note 1 below)
NA
NA
NA
 
2.5" SATA HDD/SSD 3.5" SATA HDD
Yes
Yes
Yes
Yes
Yes
2.5" SATA HDD/SSD 3.5" IDE HDD
Yes
NA
NA
NA
Yes
2.5" SATA HDD/SSD 2.5" SATA HDD/SSD
Yes
option (see note 4 below)
option (see note 4 below)
option (see note 4 below)
Yes
2.5" SATA HDD/SSD 2.5" IDE HDD/SSD
Yes
NA
NA
NA
Yes
2.5" IDE HDD/SSD 3.5" SATA HDD
Yes
NA
NA
NA
Yes
2.5" IDE HDD/SSD 3.5" IDE HDD
option (see note 1 below)
NA
NA
NA
option (see note 1 below)
2.5" IDE HDD/SSD 2.5" SATA HDD/SSD
option (see note 1 below)
NA
NA
NA
option (see note 1 below)
2.5" IDE HDD/SSD 2.5" IDE HDD/SSD
option (see note 1 and 2 below)
NA
NA
NA
option (see note 1 and 2 below)
3.5" SATA HDD 3.5" SATA HDD with AES 256-bit hardware encryption
option (see note 3 below )
NA
NA
NA
option (see note 3 below )
3.5" IDE HDD 3.5" SATA HDD with AES 256-bit hardware encryption
option (see note 3 below )
NA
NA
NA
option (see note 3 below )
3.5" SATA HDD 2.5" SATA HDD/SSD with AES 256-bit hardware encryption
option (see note 3 below )
NA
NA
NA
option (see note 3 below )
3.5" IDE HDD 2.5" SATA HDD/SSD with AES 256-bit hardware encryption
option (see note 3 below )
NA
NA
NA
option (see note 3 below )
3.5" SATA HDD with AES 256-bit hardware encryption 3.5" SATA HDD
option (see note 3 below )
NA
NA
NA
option (see note 3 below )
3.5" SATA HDD with AES 256-bit hardware encryption 3.5" IDE HDD
option (see note 3 below )
NA
NA
NA
option (see note 3 below )
3.5" SATA HDD with AES 256-bit encryption 2.5" SATA HDD/SSD
option (see note 3 below )
NA
NA
NA
option (see note 3 below )
3.5" SATA HDD with AES 256-bit hardware encryption 2.5" IDE HDD/SSD
option (see note 3 below )
NA
NA
NA
option (see note 3 below )
2.5" SATA HDD/SDD with AES 256-bit hardware encryption 2.5" SATA HDD/SSD
option (see note 3 below )
NA
NA
NA
option (see note 3 below )
2.5" SATA HDD/SDD with AES 256-bit hardware encryption 2.5" IDE HDD/SSD
option (see note 3 below )
NA
NA
NA
option (see note 3 below )
Mounting methods for the source and target drive
HDUSI5TDX
HDUS5SNDX
HDUS5325DX
JD5325SN
JD2-SID
insert directly into drive bay via Snap-in Mobile Rack
NA
Yes
Yes
Yes
NA
via removable drive enclosure
Yes
NA
NA
NA
Yes
drive sanitization
Yes
Yes
Yes
Yes
Yes
weight
27.3 lb (12.4 kg)
17.2 lb (8.8 Kg)
25.6 lb (11.6 kg)
17.2 lb (8.8 Kg)
17.2 lb (8.8 Kg)
Dimension
7.5 x 16.7 x 17.2 inch
(190.5 x 424.18 x 436.9 mm)
7.5 x 16 x 10.4 inch (190 x 406 x 264 mm)
7.5 x 16 x 10.4 inch (190 x 406 x 264 mm)
7.5 x 16 x 10.4 inch (190 x 406 x 264 mm)
7.5 x 16 x 10.4 inch (190 x 406 x 264 mm)

Note:

  1. requires additional Diamond IDE drive enclosure (model: DISCSB) for each target drive
  2. requires 2.5" to 3.5" IDE connector converter (AA25IDE35) for each target drive
  3. requires additional Diamond Cipher SATA drive enclosure (model: DCSACS256) in conjunction with your encryption key for each source or target drive. Please check the detail of the Diamond Cipher product at Diamond Cipher overview page if you are not familiar with this option.
    Data copied to a target drive inside the Diamond Cipher enclosure will be encrypted with AES 256-bit security. Data in the drive will not be accessible when remove from the drive enclosure. You can only access the encrypted data
    When Diamond Cipher enclosure is used as source, only hard drive that has been encrypted with the Addonics AES 256-bit encryption should be used. If an non-encrypted hard drive is placed inside the Diamond Cipher drive enclosure and use as a source drive, no data will be copied as the drive will appear as a blank drive to the duplicator.
  4. requires 1 additional Snap-In 25 (model: AE25SN35SA) unit for each target drive
  • Copy from 1 to 5  3.5"/2.5" SATA or IDE hard drives
  • Supports duplicating from SATA to IDE or from IDE to SATA hard drive in either 3.5" or 2.5" form factor. Source drive and target drive can be SATA or IDE, 2.5" or 3.5" in any mix.
  • Copy speed up to 260 MB/sec*., more than twice the speed of most duplicators in the market.
    *Actual speed depends on performance of the media(1)
  • High performance with no performance degradation regardless of number of targets
  • Multiple Jasper II duplicators can be connected together in a daisy chain to expand the number of targets up to 255 maximum
  • Drive is added and removed from the source or target bay, without any special tool, via either a SATA or IDE drive enclosure
  • Drive enclosure is designed to support both 3.5" and 2.5" HDD. For installing 2.5" IDE HDD into Diamond IDE drive enclosure, a 44pin - 40pin IDE connector adapter, part # AA25IDE25, is required.
  • Six (6) SATA drive enclosures, one IDE drive enclosure and one 44pin - 40pin IDE connector adapter are included. The drive enclosure can be used as a source or a target drive.
  • Addition IDE drive trays are required in order to copy more than one IDE hard drive
  • Includes one eSATA cable (AASATA100C) for daisy chaining
  • Optional 2.5" flash drive kit for duplicating M2 SATA, mSATA, CFast, CF card, slim SATA SSD or 1.8" SATA HDD/SSD
  • Supports any type of file systems using sector to sector copy
  • Can be set up to copy data only for the following supported file systems:
    • Windows FAT 16/32, exFAT, NTFS
    • Linux: Ext 2/3/4,
    • Mac: HFS/HFS/HFSX
  • Maximum drive size >4TB
  • Drive sanitizing:
    • Quick ERASE - remove data and partition table only. Data may still be recoverable using special software.
    • Full ERASE - HDD duplicator sends a WIPE command to the hard drive. This command fills 00 string to entire HDD
    • DoD ERASE - overwirtes a string of pattern over the entire disk three times according to DoD 5220.22-M sanitizing standard.
  • LCM control module provides a rich set of robust advanced configuration options (click Full LCD console feature list to see a complete list of this duplicator functions)
  • Operate as a stand alone appliance. No computer or software needed

(1) The speed here is for reference only. The transfer rate varies depending on the speed of the source and destination drive. The slowest drive in the duplication will control the overall performance of the entire duplication

  • Writing mode : Sector to Sector
  • Maximum copying speed up to 260MB/sec. Actual speed varies depending on the drive performance
  • Connectors on back of unit:
    • 2 eSATA ports for daisy chaining -  1 for uptream and 1 for downstream
    • Power cord input socket
  • Can be daisy chained with any Jasper II duplicator to increase targets up to 255 maximum
  • Powerful 32-bit CRC checksum to assure data integrity
  • Sturdy metal frame construction
  • Snap-In drive bay for easy drive insertion or removal with no special tool
  • LCD display with functional control panel
  • Well ventilated for efficient air flow.
  • Low noise high CFM ball bearing cooling fan
  • Integrated 500W 110/240 auto-sense power supply
  • Dimensions (W x D x H): 7.5 x 16.7 x 17.2 inch (190.5 x 424.18 x 436.9 mm)
  • Weight: 27.3 lb (12.4 kg)
  • Operating temperature and humidity: 0 - 60 degree C, 15% - 90% RH
  • Storage temperature and humidity: (- 20) - (65) degree C, 0% - 95% RH non-condensing

PRODUCTS

JD2-5SID - (Jasper II 5SID - 1:5 3.5"/2.5" HDD/SSD High Performance duplicator)
Content: Jasper II 1:5 3.5"/ 2.5" HDD/SSD High Speed Duplicator main unit, 6 units Diamond SATA drive enclosure(DSACSB), 1 unit Diamond IDE drive enclosure (DICSB), 1 44pin - 40pin IDE connector (AA25IDE35), one 3-foot eSATA cable (AAESATA100C), power cord, user guide
Price: 1599.00

ACCESSORIES

DICSB (Diamond encl. for 3.5" IDE hdd, black)
DICSB Diamond enclosure for 3.5" IDE hard drive (black)
Price: 39.00
DSACSB (Diamond encl. for 3.5" SATA hdd, black)
DSACSB Diamond enclosure for 3.5" SATA hard drive (black)
Price: 24.99
AD25M2MSA (2.5" M2 / mSATA Flash drive kit)
Content: 2.5" M2 / mSATA flash drive kit with easy media installation or removal design (black color), user guide
Price: 27.95
AD25CFASTD-N (2.5" CFast HDD kit, open end, black )
Content: 2.5" CFast hard drive kit with open end black color bracket for easy media nstallation, user guide.
Price: 24.95
AD25CFD-N (2.5" CF HDD PRO, easy media insertion and removal, black color)
Content: 2.5" CF hard drive kit with black color bracket and open end for easy media installation.
Price: 26.95
AD18M25S (1.8" micro SATA - 2.5" SATA HDD adapter)
Content: 1.8" micro SATA - 2.5" SATA HDD adapter,
Price: 19.00
AA25SEMBK (Slim SATA SSD 2.5" HDD adapter)
Content: 2.5" HDD adapter kit for slim SATA embedded SSD, user guiode
Price: 19.00