Jasper II 9SID, 1:9 3.5"/2.5" HDD/SSD Duplicator

The new family of Addonics Jasper II Duplicator is one of the fastest and most advanced drive duplicators in the market.

High Performance
The Jasper II Duplicator can copy at a rate up to 260 MB/sec, more than twice the performance of most duplicators in the market. Whereas the performance of most duplicators declines with increasing load, the duplication speed on a Jasper II duplicator remains the same regardless of number of drives in the copying process.

Expandable
Unlike traditional duplicator that is designed for a fixed number of targets, the duplicating capacity of a Jasper II Duplicator can be expanded by connecting two units together. So if you have two Jasper II duplicators with 2 targets and 7 targets, you can connect the two units together to turn them into a 1:10 duplicators.

High-Performance
up to 260MB/sec 
Expandable Flexible

 

 

Flexibility
Since the Jasper II Duplicator can be connected together, different type of media can be easily mixed in the duplication. For example, a Jasper II 3.5" drive duplicator can be connected to a Jasper II mSATA SSD duplicator In this set up, a 3.5" source drive can be copied onto 3.5 drive or mSATA card all at the same time.

The scalability and the flexibility in using different media as source and target allows every Jasper II Duplicator to be used in all types of drive duplication and also ensure the longevity of your investment.


About This Model:

This Jasper II 9SID is a 1:9 high performance and expandable duplicator for 3.5"/2.5" SATA/IDE HDD or SSD. The duplicator makes copies from one to eleven (9) drives at one time with speed up to 260 MB/sec. It can copy any 3.5" or 2.5" SATA or IDE hard drive to nine 3.5" or 2.5" SATA or IDE hard drives in any combination. Drives are placed inside the easily removable drive enclosures to be used as a source or target drive. With additional optional IDE drive enclosures, practically any hard drives or SDDs with a IDE or SATA interface in 2.5" or 3.5" form factors can all be mixed into the nine target drive bays to be duplicated at one time. By adding an optional Diamond Cipher drive enclosure, one can easily make backup copies of sensitive data with bullet proof AES-256 bit encryption. The Diamond Cipher Drive enclosure can also be used as a sanitizing tool to turn any used hard drives into brand new drives with no traces of any previous data. This model is the ideal duplicator for organizations with a wide variety of hard drives and needs to migrate OS or data into different storage media, to upgrade systems with same hard drive image or to wipe clean data from used hard drives.

Feature highlight:

  • Copy from 1 to 9  2.5"/3.5" SATA or IDE hard drives
  • Source drive and target drive can be SATA or IDE, 2.5" or 3.5" in any mix.
  • Ten SATA drive enclosures and one IDE drive enclosure are included. The drive enclosure can be used as a source or a target drive.
  • Addition IDE drive trays are required in order to copy more than one IDE hard drive
  • Drive is added and removed from the source or target bay via either a SATA or IDE drive enclosure
  • Drive can be mounted into drive enclosure without any special tool

 

  • Great for cloning hard drives, making back up hard drives, system upgrade or data distribution
  • Copy from 1 to 9  2.5"/3.5" SATA or IDE hard drives / SSD
  • Source drive and target drive can be SATA or IDE, 2.5" or 3.5" in any mix.
  • Ten SATA drive enclosures and one IDE drive enclosure are included. The drive enclosure can be used as a source or a target drive.
  • Addition IDE drive trays are required in order to copy more than one IDE hard drive
  • Drive is added and removed from the source or target bay via either a SATA or IDE drive enclosure
  • Drive can be mounted into drive enclosure without any special tool
  • Supports duplicating from SATA to IDE or from IDE to SATA hard drive in either 3.5" or 2.5" form factor
  • Includes one 12" eSATA cable for daisy chaining
  • High performance with no performance degradation regardless of number of targets
  • Copying speed up to 260 MB/sec*., more than twice the speed of most duplicators in the market.
    *Actual speed depends on performance of the media
  • Two Jasper II duplicators can be connected together in a daisy chain
  • Supports any type of file systems using sector to sector copy
    Can be set up to copy data only for the following supported file systems:
    • Windows FAT 16/32, exFAT, NTFS
    • Linux: Ext 2/3/4,
    • Mac: HFS/HFS/HFSX
  • Maximum drive size >4TB
    Drive sanitization:
    • Quick ERASE - remove data and partition table only. Data may still be recoverable using special software.
    • Full ERASE - HDD duplicator sends a WIPE command to the hard drive. This command fills 00 string to entire HDD
    • DoD ERASE - overwirtes a string of pattern over the entire disk three times according to DoD 5220.22-M sanitizing standard
  • LCM control module provides a rich set of robust advanced configuration options (click Full LCD console feature list to see a complete list of this duplicator functions)
  • Operate as a stand alone appliance. No computer or software needed
  • Optional Diamond Cipherdrive enclosure (model: DCSACS256) for :
    • Copying data directly onto an AES-256 bit encrypted hard drive for data security
    • As a tool to sanitize used hard drives

* The speed here is for reference only. The transfer rate varies depending on the speed of the source and destination drive. The slowest drive in the duplication will control the overall performance of the entire duplication

† Drive Sanitization via encryption (limited to SATA hard drive only)
The Diamond Cipher drive enclosure can also be used as a drive sanitization equipment for wiping clean of all previous data on an used hard when used in conjunction with any Addonics Duplicator PRO model:

  1. install the hard drive to be sanitized into the Diamond Cipher drive enclosure.
  2. Insert the Diamond Cipher drive enclosure into one of the Diamond target bays
  3. Start the copying process using a blank source drive of equal size in capacity as the target drive. Data from the source drive is then written onto the hard drive in the Diamond Cipher drive enclosure with AES-256 bit encryption.
  4. Now remove the drive from the Diamond Cipher enclosure. The drive will appear as brand new drive when installed into any computer with no trace of any data. The drive will have to be initialized, partitioned and formatted.

† The speed here is for reference only. The speed were measured basing on using 3.5" SATA III 250 GB hard drive for both source and targetThe transfer rate varies depending on the speed of the source and destination drive

  • Eleven (11) snap-in removable drive bays
  • Included one Snap-In 25 (AE25SN35SA) for installing one 2.5" hard drive. Additional Snap-In 25 is required for copying more 2.5" HDD
  • Writing mode : Sector to Sector
  • Maximum copying speed up to 260MB/sec. Actual speed varies depending on the drive performance
  • Connectors on back of unit:
    • 2 eSATA ports for daisy chaining -  1 for uptream and 1 for downstream
    • Power cord input socket
  • Can be daisy chained with any Jasper II duplicator to increase targets up to 255 maximum (require optional daisy chain cable, model: JDC24I)
  • Powerful 32-bit CRC checksum to assure data integrity
  • Sturdy metal frame construction
  • Snap-In drive bay for easy drive insertion or removal with no special tool
  • LCD display with functional control panel
  • Well ventilated for efficient air flow.
  • Two 120 x 120 mm low noise high CFM ball bearing cooling fan
  • Integrated 500W 110/240 power supply
  • Dimensions (W x D x H) - 7.5 x 15.9 x 24.25 inch (190.5 x 403.86 x 615.95 mm)
  • Weight: 45.7 lb (20.73 kg)
  • Operating environment: 0 - 60 degree C, 15% - 90% RH
  • Storage environment: (- 20) - (65) degree C, 0% - 95% RH non-condensing

PRODUCTS

JD2-9SID - (Jasper II 9SID - 1:9 3.5"/2.5" SATA/IDE HDD/SSD duplicator)
Content:Jasper II 1:9 3.5"/ 2.5" SATA/IDE HDD/SSD High Speed Duplicator main unit, 6 units Diamond SATA drive enclosure(DSACSB), 1 unit Diamond IDE drive enclosure (DICSB), 1 44pin - 40pin IDE connector (AA25IDE35), one 12" daisy chaining cable, power cord, user guide
Price: 2599.00

ACCESSORIES

DICSB (Diamond encl. for 3.5" IDE hdd, black)
DICSB Diamond enclosure for 3.5" IDE hard drive (black)
Price: 39.00
DSACSB (Diamond encl. for 3.5" SATA hdd, black)
DSACSB Diamond enclosure for 3.5" SATA hard drive (black)
Price: 24.99
DCSACS256 (Diamond Cipher SATA enclosure AES 256-bit ECB)
Content: Diamond Cipher AES 256 ECB enclosure for SATA/SATA II hard drive
Price: 79.00