1:9 M2 SATA SSD/ 2.5" SATA HDD/SSD HS Duplicator PRO

The Addonics family of M2/SSD/HDD duplicator is designed for making multiple copies of M2 SATA SSD or 2.5" SATA HDD/SSD from a single master drive. Each duplicator comes bundled with a set of 2,5" M2 flash drive adapter that turns a M2 SATA SSD into a 2.5" SATA SSD. You can mix and match the M2 SATA SSD, 2.5" SSD or hard drive into the duplicator, thus making it a handy tool for transferring the content between the M2 SATA SSD and 2.5" SATA HDD/SSD. There is no computer needed or complex software to operate the Addonics duplicator. Just load the master media into the source bay and the target media of capacity equal or larger into the target bays, lock the drive doors and push the start button to start the copying process.


About This Model

This 1:9 M2 SATA SSD/ 2.5" SATA HDD/SSD HS Duplicator PRO allows you to copy from one source media onto as many as nine (9) target media at one time. Using the included 2.5" M2 flash drive adapters, the M2 SATA SSD can be used just like a regular 2.5" SATA hard drive. The source and target drive can be of either M2 SATA SSD, 2.5" SATA SSD or 2.5" SATA hard drive. An additional 3.5" source slot is included to allow using 3.5" SATA HDD as a source media, a convenient solution to transfer data from 3.5" SATA drive to M2 SSD, 2.5" SATA hard drive or SSD.  Drives are loaded and unloaded from the duplicator just like cassette tape without any drive tray or special tool. The high performance duplicator controller in this unit also ensures optimal performance in copying from one to nine targets. Using other optional Addonics 2.5" Flash drive adapters, this duplicator can also be used for making copies of many common flash media such as mSATA/mini mSATA SSD, CFast card, CF card, slim SATA and 1.8" HDD/SSD. 

 

Illustration of loading the M2 card or 2.5" SSD/HDD into the duplicator and source drive selection



Illustration of installing the M2 SATA SSD onto the 2.5" M2 SSD drive kit

 

 

      

2.5" M2 SSD drive shown
face down

 

 


The following Addonics optional 2.5" flash drive kit allows this duplicator to copy mSATA/mini mSATA, CFast, CF card or slim SATA SSD 
(Shown with media side facing up)

mSATA SSD in 2.5" mSATA drive adapter, also support mini mSATA media (AD25MSD-E)

CFast card in 2.5" CFast 
drive adapter (AD25CFASTD-N)

CF card in 2.5" CF drive adapter
(AD25CFD-N)

Slim SATA SSD 2.5" HDD
adapter (AA25SEMBK)

2.5" HDD adapter for 1.8" drive
(AD18M25S

note: the flash cards shown above are for illustration purpose and are not part of the flash drive adapter

 

For a quick comparison of various models in the M2/SSD/HDD Duplicator, click on the following link http://addonics.com/faq/m2com.php

  • Copy up to nine (9) M2 SATA SSD or 2.5" SATA HDD/SSD with thickness up to 9.5 mm
  • The supported media can be mixed in the target slots - great for transferring content between M2 SATA SSD and 2.5" SATA HDD/SSD
  • Supported source media - 3.5" SATA HDD, 2.5" M2 SATA SSD or 2.5" SATA HDD/SSD 
  • Comes with ten (10) units of M2 flash drive adapters (AD25M2SSD-E) to convert M2 SATA SSD to 2.5" SSD
  • An easy source switch at the back of the unit for selecting 3.5" drive or 2.5" drive source slot
  • Additional support for mSATA/mini mSATA, CFast, CF, slim SATA SSD and 1.8" HDD/SSD with the following optional model of 2.5" flash drive kit - AD25MSD-EAD25CFASTD-NAD25CFD-N, AA25SEMBKAD18M25S
  • High performance with minimum degradation in copying from one to nine targets
  • Typical copying speed*:
Copying Speed
1 target 3 targets 5 targets or more
~ 105 MB/sec ~85 MB/sec ~ 80 MB/sec
  • Support any file system
  • Support maximum media capacity >4TB
  • Source and Destination drives are added or removed like tape cartridges from each drive bay with no special tool required
  • Drive sanitization:
    • SECURE ERASE - HDD duplicator sends a WIPE command to the hard drive. This command fills 00 string to entire HDD (this option may not be supported on certain SSD or flash media)
    • OVERWRITE - One pass, 3 passes and 7 passes 5220.22-M. The duplicator writes a string of pattern over the entire disk one time, three times or seven times. 5220.22-M is the DoD standard for drive sanitization
  • LCM control module provides a rich set of robust advanced configuration options (diagram of duplicator features can be here Full LCD console feature list)
  • Operate as a stand alone appliance. No computer or software needed

* The speed here is for reference only. The actual transfer rate varies depending on the speed of the source and destination drive


Components for the main unit
Storage Tower (ST9), 1:9 HDD High Speed Duplicator subsystem (HDU9SASHS), five (5) units of the Snap-In Double Drive (AE25SNAP2SA), one 3.5" Snap-In SATA Mobile Rack II (AESNMRS)

Bundled accessories: ten (10) units of 2.5" M2 flash drive adapters (AD25M2SSD-E), power cord, user guide


  • Writing mode: Sector to Sector
  • Typical copying speed:
Maximum Copying Speed
1 target 3 targets 5 targets or more
~ 105 MB/sec ~ 85 MB/sec ~ 80 MB/sec
  • Sturdy metal frame construction
  • Drives are added or removed just like VHS cassette without tools
  • LCD display with functional control panel
  • Two low noise high CFM ball bearing cooling fans
  • Power consumption: 15 - 150 Watts (varies depending on the media)
  • Integrated 500W universal AC 110/240V power supply
  • Dimension (W x L x H): ~ 7.5 x 17.25 x 17.2 in. (90 x 438 x 437 mm.)
  • Weight (main unit): ~ 23.93 lb (10.85 Kg)
  • Operating temperature and humidity: 0 - 50 degree C, 15% - 90% RH
  • Storage temperature and humidity: (-20) - 65 degree C, 0% - 95% RH non-condensing

Specification subject to change without notice

PRODUCTS

M2HU9HS-2S - (1:9 M2 /SSD/ HDD HS Duplicator PRO)
Content: 1:9 M2 (NGFF) /SSD/HDD High Speed Duplicator PRO main unit, ten (10) units of 2.5" M2 flash drive kit (AD25M2SSD), power cord, user guide

Price: 1459.00

ACCESSORIES

AD25CFASTD-N (2.5" CFast HDD kit, open end, black )
Content: 2.5" CFast hard drive kit with open end black color bracket for easy media nstallation, user guide.
Price: 24.95
AD25M2SSD-E (2.5" M2 Flash drive kit PRO)
Content: 2.5" M2 (NGFF) SSD drive kit with easy media installation or removal design
Price: 24.95
AD25MSD-E (2.5" mSATA flash hard drive kit PRO)
Content: 2.5" mSATA flash memory hard drive kit for standard mSATA and mSATA mini (half size) SSD
Price: 24.95
AD25CFD-N (2.5" CF HDD PRO, easy media insertion and removal, black color)
Content: 2.5" CF hard drive kit with black color bracket and open end for easy media installation.
Price: 26.95
AD18M25S (1.8" micro SATA - 2.5" SATA HDD adapter)
Content: 1.8" micro SATA - 2.5" SATA HDD adapter,
Price: 19.00
AA25SEMBK (Slim SATA SSD 2.5" HDD adapter)
Content: 2.5" HDD adapter kit for slim SATA embedded SSD, user guiode
Price: 19.00
Userguides
Frequently Asked Questions