1:9 M2/mSATA/2.5" HDD/SSD HS Duplicator

The Addonics family of Combo M2 and mSATA HDD duplicator is designed for making multiple copies of M2 SATA SSD, mSATA SSD or 2.5" SATA HDD/SSD from a single master drive. Each duplicator comes bundled with a set of 2,5" M2/mSATA flash drive kit that turns a M2 SATA SSD or mSATA SSD into a 2.5" SATA SSD. You can mix and match the M2, mSATA SSD and the hard drive into the duplicator, thus making it a handy tool for transferring the content between the M2 SATA SSD, mSATA SSD and 2.5" HDD/SSD. There is no computer needed or complex software to operate. Just open the doors on the drive bays, load the master media into the source bay and the target media of capacity equal or larger into the target bays, lock the drive doors and push the start button to start the copying process.

 

About This Model

This 1:9 M2, mSATA and 2.5" HDD/SSD high speed duplicator allows you to copy from one source media onto as many as nine (9) target media at one time. Source and target media can be of either M2 SATA SSD, mSATA or mini mSATA SSD or 2.5" SATA HDD/SSD. Designed with snap-In drive bay, drives are easily added or removed without any special tool, just like an ordinary cassette tape.

For duplicator with the highest performance and also expansion capability, please visit the Jasper II series of duplicator.


Installing the M2 SATA SSD onto the 2.5" M2/mSATA flash drive kit 

2.5 CF Flash drive

 


Installing the mSATA card onto the 2.5" M2/mSATA flash drive kit


The following Addonics optional 2.5" flash drive kit can be used for duplicating CFast , CF card, slim SATA SSD or 1.8"  drive.

Show with media side facing up

CFast card in 2.5" CFast
drive kit (AD25CFASTD-N)

CF card in 2.5" CF drive kit
(AD25CFD-N)

Slim SATA SSD 2.5" HDD
adapter (AA25SEMBK)

1.8" micro SATA - 2.5" SATA
HDD adapter (AD18M25S

note: the flash cards shown above are for illustration purpose and are not part of the flash drive adapter

  • Copy up to nine (9) M2 SATA SSD¹, mSATA/mini mSATA SSD or 2.5" SATA HDD/SSD with thickness up to 9.5 mm
  • The supported media can be mixed in the target slots - great for transferring content among M2 SATA SSD, mSATA SSD, mini mSATA SSD and 2.5" SATA HDD/SSD
  • Comes with ten (10) units of 2.5" M2/mSATA flash drive kits (AD25M2MSA) to convert M2 SATA SSD or mSATA SSD to 2.5" SATA SSD
  • Additional support for M2 (NGFF), CFast, CF, slim SATA SSD and 1.8" HDD/SSD with the following optional 2.5" flash drive kit - AD25CFASTD-NAD25CFD-NAA25SEMBKAD18M25S
  • Typical copying speed*
 Copying Speed
1 target 3 targets 4 targets or more
~ 105 MB/sec ~ 70 MB/sec ~ 70 MB/sec
  • Compact size and light weight for easy transportation
  • Support any file system
  • Maximum storage capacity >4TB
  • Source and Destination drives are added or removed like tape cartridges from each drive bay with no special tool required
  • Drive sanitization:
    • SECURE ERASE - HDD duplicator sends a WIPE command to the hard drive. This command fills 00 string to entire HDD (this option may not be supported on some SSD or mSATA card)
    • OVERWRITE - One pass, 3 passes and 7 passes 5220.22-M. The duplicator writes a string of pattern over the entire disk one time, three times or seven times. 5220.22-M is the DoD standard for drive sanitization
  • LCM control module provides a rich set of robust advanced configuration options (diagram of duplicator features can be here Full LCD console feature list)
  • Operate as a stand alone appliance. No computer or software needed

Notes
* The speed here is for reference only. The acutal transfer rate varies depending on the speed of the source and destination drive

1  There are three types of M2 SSD: M2 SATA SSD, M2 PCIe SSD and M2 NVMe SSD. M2 SATA SSD uses SATA interface, the same interface on SATA hard drive, and is the only type of M2 media supported by this duplicator.


Components for the main unit
Storage Tower (ST4-A), 1:9 HDD High Speed Duplicator subsystem (HDU9SASHS), five (5) Snap-In Double Drives (AE25SNAP2SA), one 5-IN-3 Drive chassis (AA5IN3BK)

Bundled accessories: ten (10) units of 2.5" M2/mSATA flash drive kits (AD25M2MSA), power cord, user guide


  • Writing mode: Sector to Sector
  • Typical copying speed
 Copying Speed
1 target 3 targets 4 targets or more
~ 105 MB/sec ~ 80 MB/sec ~ 85 MB/sec
  • Sturdy metal frame construction
  • Drives are added or removed just like VHS cassette without tools
  • LCD display with functional control panel
  • Well ventilated for efficient air flow.
  • Low noise high CFM ball bearing cooling fan
  • Integrated universal AC 110/240V power supply
  • Dimension: 8.19 x 12.94 x 8 inch ( 208 x 329 x 203 mm)
  • Weight: ~ 14.75 lb (6.69 Kg)
  • Operating temperature and humidity: 0 - 50 degree C, 15% - 90% RH
  • Storage temperature and humidity: (-20) - (65) degree C, 0% - 95% RH non-condensing

Specification subject to change without notice

PRODUCTS

M2MSH9H - (1:9 M2 / 2.5" SSD/ HDD HS Duplicator)
Content: 1:9 M2/mSATA/ 2.5" SSD/HDD High Speed Duplicator main unit, ten (10) units of 2.5" M2/mSATA flash drive kit (AD25M2MSA), power cord, user guide
Price: 1499.00

ACCESSORIES

AD25CFASTD-N (2.5" CFast HDD kit, open end, black )
Content: 2.5" CFast hard drive kit with open end black color bracket for easy media nstallation, user guide.
Price: 24.95
AD25CFD-N (2.5" CF HDD PRO, easy media insertion and removal, black color)
Content: 2.5" CF hard drive kit with black color bracket and open end for easy media installation.
Price: 26.95
AA25SEMBK (Slim SATA SSD 2.5" HDD adapter)
Content: 2.5" HDD adapter kit for slim SATA embedded SSD, user guiode
Price: 19.00
AD25M2MSA (2.5" M2 / mSATA Flash drive kit)
Content: 2.5" M2 / mSATA flash drive kit with easy media installation or removal design (black color), user guide
Price: 27.95