Discontinued and replaced by UDD25SU3-4F
This internal Reader/Writer is a handy accessory that allows you to use the mSATA SSD or the CFast card as a removable media on any computer. Designed to mount directly onto a 3.5" drive bay of any system, this reader/writer can connect internally via SATA port or the internal SuperSpeed USB 3.0 port, assuring maximum performance possible on the mSATA SSD or the CFast card.
The Reader/Writer comes bundled with two adapters for the mSATA SSD and CFast card respectively. The adapter converts the mSATA or the CFast media into a 1.8" micro SATA SSD that can be inserted into the open slot of the reader/writer. The device is fully plug and play with no software driver to install. A model with two slots is also available to accomodate two media onto the same drive bay.
1.8" micro SATA SSD or hard drive can also be directly inserted into the device slot of this Reader/Writer.. With the optional CF - micro SATA adapter, this device can also be used to to read write to standard CF media
Diagram below shows the various types of media that
are supported by this reader / writer (the mSATA and
CFast adapters are included with the reader /writer).
All the media shown are for illustration propose
and are not part of the product.
SATA I / II / III
|Maximum Read / Write Speed:||
SATA - up to 6,000 mbps
SATA - PC power supply with floppy type or 4-pin Molex power connector (Onboard voltage regulator to provide 3.3V required by the media)
|Dimensions:||101 mm (W) x 126 mm (D) x 25 mm (H)|
|Weight:||MSCFASA, MSCFASU3: 6.49oz (184g)
MSCFA2SA, MSCFA2SU3: 8.25oz (234g)
|Operating Temperature and humidity||- 48 °C to + 85 °C (industrial grade), 5 - 90% RH|
|Storage Temperature and humidity||-48 °C to + 85 °C, 5 - 95% RH non condensing|
ADMS18SA Adapter for connecting mSATA SSD to micro SATA interface.