1:11 mSATA / HDD / SSD Compact Duplicator

Disoncontinued and replaced by M2MSHD11

The Addonics family of Combo mSATA HDD duplicator is designed for making multiple copies of mSATA SSD or 2.5" SATA HDD/SSD from a single master drive. Each duplicator comes bundled with a set of 2,5" mSATA flash drive kit that turns a mSATA SSD into a 2.5" SATA SSD. You can mix and match the mSATA SSD and the hard drive into the duplicator, thus making it a handy tool for transferring the content between the mSATA card and 2.5" hard drive. There is no computer needed or complex software to operate. Just open the doors on the drive bays, load the master media into the source bay and the target media of capacity equal or larger into the target bays, lock the drive doors and push the start button to start the copying process.

 

About This Model

This 1:11 Combo mSATA SSD HDD Compact duplicator allows you to copy from one source media onto as many as eleven (11) target media at one time. Source and target media can be of either mSATA SSD or 2.5" SATA hard drive. Designed with snap-In drive bay, drives are easily added or removed without any special tool, just like an ordinary cassette tape. By adding other optional 2.5" flash drive adapters, the supported media can be expanded to include M2 (NGFF) card, CFast card, CF card, slim SATA SSD and 1.8" HDD/SSD.

 

Installing the mSATA SSD onto the 2.5" mSATA flash drive kit (also applies to mini mSATA SSD) 

        

 

The following Addonics optional 2.5" flash drive kits allow this duplicator to copy mSATA/mini mSATA, CFast, CF card or slim SATA SSD

(Shown with media side facing up)

M2 card in 2.5" M2 drive
kit (AD25M2SSD-N)

CFast card in 2.5" CFast 
drive kit (AD25CFASTD-N)

CF card in 2.5" CF drive kit
(AD25CFD-N)

Slim SATA SSD 2.5" HDD
adapter (AA25SEMBK)

2.5" HDD adapter for 1.8" drive
(AD18mSATA5S

note: the flash cards shown above are for illustration purpose and are not part of the flash drive adapter

  

Combo mSATA SSD / 2.5" HDD/SSD Duplicator family comparison chart

Copying options
From source
To target
$ $ $ $ $ $
mSATA SSD mSATA SSD
Yes, up to 5 targets
Yes, up to 5 targets
Yes, up to 9 targets
Yes, up to 9 targets
Yes, up to 11 targets
 Yes, up to 11 targets
mSATA SSD 2.5" SATA HDD/SSD
Yes, up to 5 targets
Yes, up to 5 targets
Yes, up to 9 targets
Yes, up to 9 targets
Yes, up to 11 targets
 Yes, up to 11 targets
2.5" SATA HDD/SSD 2.5" SATA HDD/SSD
Yes, up to 5 targets
Yes, up to 5 targets
Yes, up to 9 targets
Yes, up to 9 targets
Yes, up to 11 targets
 Yes, up to 11 targets
2.5" SATA HDD/SSD mSATA SSD
Yes, up to 5 targets
Yes, up to 5 targets
Yes, up to 9 targets
Yes, up to 9 targets
Yes, up to 11 targets
 Yes, up to 11 targets
3.5" SATA HDD/SSD mSATA or 2.5" SSD/HDD
NA
 NA
NA
Yes
NA
 NA
  • Copy up to eleven (11) mSATA/mini SATA SSD or 2.5" SATA HDD/SSD with thickness up to 9.5 mm
  • The supported media can be mixed in the target slots - great for transferring content from mSATA SSD to HDD or vice versa 
  • Comes with twelve (12) units of 2.5" mSATA flash drive kits (AD25MSD-E) to convert mSATA/mini SATA SSD to 2.5" SSD
  • Additional support for M2 (NGFF), CFast, CF, slim SATA SSD and 1.8" HDD/SSD with the following optional 2.5" flash drive kit - AD25M2SSDAD25CFASTDAD25CFDAA25SEMBKAD18M25S
  • Typical copying speed*
 Copying Speed
1 target 3 targets 4 targets or more
~ 105 MB/sec ~ 70 MB/sec ~ 50 MB/sec
  • Compact size for easy transportation
  • Support any file system
  • Maximum storage capacity >3TB
  • Source and Destination drives are added or removed like tape cartridges from each drive bay with no special tool required
  • Drive sanitization:
    • SECURE ERASE - HDD duplicator sends a WIPE command to the hard drive. This command fills 00 string to entire HDD (this option may not be supported on some SSD or mSATA card)
    • OVERWRITE - One pass, 3 passes and 7 passes 5220.22-M. The duplicator writes a string of pattern over the entire disk one time, three times or seven times. 5220.22-M is the DoD standard for drive sanitization
  • LCM control module provides a rich set of robust advanced configuration options (diagram of duplicator features can be here Full LCD console feature list)
  • Operate as a stand alone appliance. No computer or software needed

The speed here is for reference only. The actual transfer rate varies depending on the speed of the source and destination drive


Components for the main unit
Storage Tower (STMPC-B), 1:11 HDD High Speed Duplicator subsystem (HDU11SAS), six (6) Snap-In Double Drive (AE25SNAP2SA), one 5-IN-3 Drive chassis (AA5IN3BK)

Bundled accessories: twelve (12) units of SATA - mSATA SDD adapters (AD25MSD), power cord, user guide


  • Writing mode: Sector to Sector
  • Typical copying speed
 Copying Speed
1 target 3 targets 4 targets or more
~ 105 MB/sec ~ 70 MB/sec ~ 50 MB/sec
  • Sturdy metal frame construction
  • Drives are added or removed just like VHS cassette without tools
  • LCD display with functional control panel
  • Well ventilated for efficient air flow.
  • Low noise high CFM ball bearing cooling fan
  • Integrated 340W 110/240 auto-sense power supply
  • Dimensions (W x D x H): 7.5 x 16 x 10.4 inch (190 x 406 x 264 mm)
  • Weight: ~ 17.2 lb (8.8 Kg)
  • Operating temperature and humidity: 0 - 50 degree C, 15% - 90% RH
  • Storage temperature and humidity: (-20) - (65) degree C, 0% - 95% RH non-condensing

Specification subject to change without notice

PRODUCTS

ACCESSORIES

AD25CFASTD (2.5" CFast hard drive kit)
Content: 2.5" CFast card hard drive kit with black color bracket, user guide. (Require removing the circuit board from the bracket to install or replace the CFast card. Good for permanent and secure media installation.)
Price: 24.95
AD25M2SSD (2.5" M2 Flash drive kit (black))
Content: 2.5" M2 (NGFF) SSD drive kit (black color)

Price: 24.95
AD25MSD (2.5" mSATA flash hard drive kit)
Content: 2.5" mSATA SSD hard drive kit.
Price: 24.95
AD25CFD (2.5" CF hard drive kit)
Content: 2.5" CF card hard drive kit with black color bracket, user guide. (Require removing the circuit board from the bracket to install or replace the CF card. Good for permanent and secure media installation.)
Price: 26.95
AD18M25S (1.8" micro SATA - 2.5" SATA HDD adapter)
Content: 1.8" micro SATA - 2.5" SATA HDD adapter,
Price: 19.00
AA25SEMBK (Slim SATA SSD 2.5" HDD adapter)
Content: 2.5" HDD adapter kit for slim SATA embedded SSD, user guiode
Price: 19.00
Userguides