IDE - CF Adapter PRO

The IDE-CF Adapter PRO enables any CF media to be used as a removable storage media without the need to restart the system, just like using a regular floppy disc. Designed for IDE connection, the IDE-CF Adapter PRO supports all IDE modes and maximum throughput of UDMA6 (133MB/sec). There is no driver to install the IDE-CF Adapter PRO and it is compatible with practically any OS. Once installed, the CF instantly behaves like a SSD (solid state drive) to the OS and can be used as a bootable device. The IDE-CF Adapter PRO is an ideal solution for small industrial PC, Kiosk or any system with IDE interface to utilize CF for data storage or as a high performance boot device.

The IDE-CFAdapter PRO comes with upgradeable firmware to ensure compatibility with future new Flash standard. There is also choice of a READ only model, an ideal solution for the forensic application.

2007-05-23 CF - 2.5" IDE Adapter

If you have a PowerBook or iBook with an IDE bus and have outgrown its hard drive, want to reduce the 'Book's weight by several ounces, would like to run more quietly, or simply like to tinker, the Addonics CF Hard Drive Adapter could be worthwhile investment - especially if you have some CF cards that aren't being used.

View article

2006-08-10 CF - IDE Adapter

ADDONICS will please everyone with this Compactflash to IDE interface that allows booting any OS on Earth from a microdrive or CF memory card, but does so using a Serial-ATA connection.

View article

2006-07-21 CF - IDE Adapter

Boot any OS on Earth from a CF card or Microdrive. The adapter's construction is good, the price is right, and the ability to turn it from a front side bay adapter to one hidden in the back via the included PCI bracket is a nice bonus.

View article

  • High Speed IDE connection supporting up to UDMA6 (133 MB/sec) data transfer
  • Direct access of Compact Flash Type I / II
  • Choice of Read/Write or READ only models
  • Install into standard 3.5" drive bay
  • Master and slave jumper configuration
  • Maximum data transfer rate depends on the speed of the flash media
  • Supports hot swap
  • Single drive icon to access one media at a time
  • upgradeable firmware to ensure future compatibility
  • Green LED to indicate media access
  • Complete Plug and Play
  • No software driver to install. Compatible with practically any OS.
Master / Slave setting via onboard jumper
Maximum Read / Write Speed: all PIO modes, all UDMA modes up to UDMA6 (133MB/s)
Supported media Compact Flash Type I / II
Hot swap media Yes. Media can be removed and added without restarting the system
Supported OS DOS, Windows 7, 2000, XP, 2008, Vista, Mac OS X or higher, Linux
Dimensions: 4 in (W) x 5.5 in (D) x 1 in (H)
Weight: 5.6 oz (159g) (approx. )
Operating Tempera tire and Humidity : 0 C to + 60C, 5 - 95 % RH non condensing
Storage Temperature and Humidity: -20 °C to + 60 °C , 5 - 90% RH
Warranty: One Year


IDE-CF Adapter PRO, installation guide,
Price: 29.95
IDE-CF Adapter PRO Read only firmware , installation guide,
Price: 29.95


IDE - CF Adapter PRO
AEUDMACF hot swap driver for DOS
Applies to: AEUDMACF

Software driver to support hot swapping CF media on the IDE-CF adapter PRO reader/writer under DOS