1:5 CFast Duplicator PRO

Discontinued and replaced by CFASTD4-2S

The Addonics CF or CFast Duplicator is a family of fast and economical equipment for making copies of CF or CFast media. Choose from an array of models that allows you to duplicate 4, 5 or even 10 media at a time. The CF/CFast Duplicator is also easy to operate.  Simply insert the source media into the source slot and target media with equal or larger capacity into the destination slots, then push the copy button to start the copying process. There is no complicated software to run.

About this model

This 1:5 CFast Duplicator PRO model allows you to copy from one CFast or CFcard onto as many as five(5) CFast cards at one time. It is a perfect equipment for content distribution using CF media or for transferring content from CF card to CFast card.


Front view


Rear view of the duplicator


Supported flash media copying options

CFAST Duplicator
Model Product name Source Destination


1:5 CFast Duplicator CFast card from 1 to 5 CFast cards


1:4 CFast Duplicator PRO CF card (type I or II) or CFast card from 1 to 5 CFast cards


1:10 CFast Duplicator PRO CF card (type I or II) or CFast card from 1 to 10 CFast cards
  • Make copy from any type of CFast or CF* card
  • Selectable CF or CFast source slot via a source switch at the back of the unit
  • Duplicate from one up to five (5) CFast cards at one time
  • CF slot is compatible with CF-I, CF-II and Micro Drive
  • Drive sanitization:
    • SECURE ERASE - HDD duplicator sends a WIPE command to the hard drive. This command fills 00 string to entire HDD (this feature may not be supported by some CFast and CF media)
    • OVERWRITE - One pass, 3 passes, and 7 passes 5220.22-M. The duplicator writes a string of pattern over the entire disk one time, three times or seven times. 5220.22-M is the DoD standard for drive sanitization
  • Completely standalone with no additional hardware or software required
  • Copy speed up to 110 MB/sec depending on the performance of the media
  • OS independent
  • LCM control module provides a rich set of robust advanced configuration options (click Full LCD console feature list  in this duplicator)
  • Green LED to both source and destination slots to indicate media access


* not compatible with CF media that operate in PIO mode only

  • Writing mode: Sector to Sector
  • Support up to 110 MB/sec transferring rate (actual transfer rate depends on the speed of flash media in the source and the destination slot)
  • Sturdy metal frame construction
  • One CF and one CFast source slots
  • Five (5) CFast target slots
  • CF slot supports Compact Flash Type I (CF-I), Compact Flash Type II (CF-II), Micro DriveTM
  • LCD display with a functional control panel
  • Well ventilated for efficient air flow.
  • Low noise high CFM ball bearing cooling fan
  • Integrated 80W 110/240 auto-sense power supply
  • Compact size - 7.48 x 10.63 x 6.5 inch (190 x 270 x 16.5 mm) (W x D x H)
  • Weight: 8.15 lb (3.70 Kg)
  • Operating environment: 0 - 60 degree C, 15% - 90% RH
  • Storage environment: -40 - 90 degree C, 0% - 95% RH non-condensing
  • 1 year warranty