1:19 2.5" HDD/SSD HS Duplicator PRO

The Addonics family of 2.5" HDD/SSD duplicator is designed for making multiple copies of 2.5" SATA HDD/SSD from a single master drive. There is no computer needed or complex software to operate. Just open the doors on the drive bays, load the master media into the source bay and the target media of capacity equal or larger into the target bays, lock the drive doors and push the start button to start the copying process.


About this model

This 1:19  2.5" HDD/SSD HS Duplicator PRO allows you to copy from one source drive onto as many as nineteen (19) 2.5" HDD/SSD at one time.  In addition, there is a source slot for using a 3.5" hard drive as a master drive, a great solution for transferring content on 3.5" SATA hard drive to 2.5" HDD/SSD. By adding other optional 2.5" flash drive adapters, the supported media can be expanded to include M2 SATA SSD, mSATA SSD, CFast card, CF card, slim SATA SSD and 1.8" HDD/SSD. Designed with snap-In drive bay, drives are easily added or removed without any special tool, just like an ordinary cassette tape.


Duplicator overview



The following Addonics optional 2.5" flash drive kit can be used for duplicating CFast , CF card, slim SATA SSD or 1.8"  drive.

Show with media side facing up

2.5" M2/mSATA SSD drive
kit (AD25M2MSA)

CFast card in 2.5" CFast
drive kit (AD25CFASTD-N)

CF card in 2.5" CF drive kit

Slim SATA SSD 2.5" HDD
adapter (AA25SEMBK)

1.8" micro SATA - 2.5" SATA
HDD adapter (AD18M25S

note: the flash media shown above are for illustration purpose and are not part of the flash drive adapter

  • Copy up to nineteen (19) 2.5" SATA HDD/SSD with drive thickness up to 9.5 mm
  • Supported source media: 2.5" SSD, 2.5" hard drive or 3.5" hard drive
  • An easy source switch at the back of the unit for selecting 3.5" HDD or 2.5" HDD as the source slot
  • Additional support for M2 SATA SSD, mSATA/mini mSATA SSD, CFast, CF, slim SATA SSD and 1.8" HDD/SSD with the following optional 2.5" flash drive kit -  AD25M2MSA, AD25CFASTD-NAD25CFD-NAA25SEMBKAD18M25S
  • Maximum copying speed ~ 120MB/sec with no performance degradation from increased loading
  • Support any file system
  • No drive capacity limitation
  • Source and Destination drives are added or removed like tape cartridges from each drive bay with no special tool required
  • Drive sanitizing:
    • Quick ERASE - remove data and partition table only. Data may still be recoverable using special software.
    • Full ERASE - HDD duplicator sends a WIPE command to the hard drive. This command fills 00 string to entire HDD
    • DoD ERASE - overwrites a string of pattern over the entire disk three times according to DoD 5220.22-M sanitizing standard
  • LCM control module provides a rich set of robust advanced configuration options (diagram of duplicator features can be here Full LCD console feature list)
  • Operate as a stand-alone appliance. No computer or software needed

* The speed here is for reference only. The actual transfer rate varies depending on the speed of the source and destination drive

  • Writing mode: Sector to Sector
  • Support maximum drive thickness up to 9.5 mm
  • Maximum copying speed ~ 120 MB/sec
  • Sturdy metal frame construction
  • Drives are added or removed just like VHS cassette without tools
  • An LCD display with a functional control panel
  • Well ventilated for efficient air flow.
  • Two low noise high CFM ball bearing cooling fan
  • Integrated universal AC 110/240V power supply
  • Dimension: ~7.5 x 15.9 x 24.25 inch (190.5 x 403.86 x 615.95 mm)
  • Weight: ~41.3 lb (18.73 Kg)
  • Operating temperature and humidity: 0 - 50 degree C, 15% - 90% RH
  • Storage temperature and humidity: (-20) - (65) degree C, 0% - 95% RH non-condensing

Specification subject to change without notice


HD1925H-2SP - (1:19 2.5" HDD/SSD HS Duplicator PRO)
Content: 1:19 2.5 SSD/HDD High Speed Duplicator PRO main unit, power cord, quick user guide, HS Duplicator controller user guide

Price: 2499.00


AD25CFASTD-N (2.5" CFast HDD kit, open end, black )
Content: 2.5" CFast hard drive kit with open end black color bracket for easy media nstallation, user guide.
Price: 24.95
AD25CFD-N (2.5" CF HDD PRO, easy media insertion and removal, black color)
Content: 2.5" CF hard drive kit with a half open-end black color bracket for easy media installation.
Price: 26.95
AD18M25S (1.8" micro SATA - 2.5" SATA HDD adapter)
Content: 1.8" micro SATA - 2.5" SATA HDD adapter,
Price: 19.00
AA25SEMBK (Slim SATA SSD 2.5" HDD adapter)
Content: 2.5" HDD adapter kit for slim SATA embedded SSD, user guiode
Price: 19.00
AD25M2MSA (2.5" M2 / mSATA Flash drive kit)
Content: 2.5" M2 / mSATA flash drive kit with easy media installation or removal design (black color), user guide
Price: 27.95