1:3 2.5" HDD/SSD High-Speed Duplicator

About the 2.5" HDD/SSD Duplicator Series

The Addonics family of 2.5" duplicator is an economical hard drive duplicator solution with choice of models for copying from three up to as many as eleven 2.5" SATA hard drive or SSD. There is no computer needed or complex software to operate. Just open the doors on the drive bays, load your master hard drive to the source bay and other hard drives of capacity equal or larger into the target bays, lock the drive doors and push the start button to start the copying process.

About This Model

This 1:3 2.5" HDD/SSD High-Speed duplicator with integrated Snap-In Double Drive allowing hard drives to be easily added or removed from the system without any special tool, just like an ordinary VHS tape cartridge.

     

   


The following Addonics optional 2.5" flash drive kit can be used for duplicating CFast , CF card, slim SATA SSD or 1.8"  drive.

Show with media side facing up

2.5" M2/mSATA SSD drive
kit (AD25M2MSA)

CFast card in 2.5" CFast
drive kit (AD25CFASTD-N)

CF card in 2.5" CF drive kit
(AD25CFD-N)

Slim SATA SSD 2.5" HDD
adapter (AA25SEMBK)

1.8" micro SATA - 2.5" SATA
HDD adapter (AD18M25S

note: the flash cards shown above are for illustration purpose and are not part of the flash drive adapter


  • Copy up to three 2.5" SATA hard drives or SSD
  • Great for cloning hard drives, making backup hard drives, system upgrade and data distribution
  • Support any file system
  • Support any 2.5" SATA hard drive or SSD with thickness up to 12.7 mm
  • Can also be used for duplicating other flash media - M2, mSATA, CFast, CF, slim SATA and 1.8" HDD/SSD, using optional Addonics family of 2.5" Flash drive kit
  • High performance with minimum performance degradation duplicating from 1 to 3 drives
  • Maximum copying speed up to 120 MB/sec. Actual speed depends on the performance of the drive
  • Maximum drive size: no know capacity limitation
  • Drives are added into or removed directly from each drive bay without any special tool
  • Support any type of file format
  • Drive sanitization:
    • SECURE ERASE - HDD duplicator sends a WIPE command to the hard drive. This command fills 00 string to entire HDD
    • OVERWRITE - One pass, 3 passes and 7 passes 5220.22-M.  The duplicator writes a string of pattern over the entire disk one time, three times or seven times.5220.22-M is the DoD standard for drive sanitization
  • LCM control module provides a rich set of robust advanced configuration options (click Full LCD console feature list to see a complete list of this duplicator functions)
  • Operate as a stand alone appliance. No computer or software needed

The speed here is for reference only. The speed were measured basing on using 3.5" SATA III 250 GB hard drive for both source and target. The transfer rate varies depending on the speed of the source and destination drive 

  • Writing mode : Sector to Sector
  • Maximum copying speed up to 120 MB/sec. Actual speed depends on the performance of the drive
  • Sturdy metal frame construction
  • Drives are added or removed just like VHS cassette without tools
  • LCD display with functional control panel
  • Well ventilated for efficient air flow.
  • Low noise high CFM ball bearing cooling fan
  • Integrated universal AC 110/240V power supply
  • Dimension: 7.48 x 10.63 x 6.5 inch (190 x 270 x 16.5 mm)
  • Weight: ~ 8 lb (3.63kg)
  • Operating temperature and humidity: 0 - 50 degree C, 15% - 90% RH
  • Storage temperature and humidity: (-20) - (65) degree C, 0% - 95% RH non-condensing

Specification subject to change without notice

PRODUCTS

HD325H - (1:3 2.5" HDD/SSD High-Speed duplicator)
Content: 1:3 2.5" HDD/SSD High Speed Duplicator main unit, power cord, user guide
Price: 655.00

ACCESSORIES

AD25CFASTD (2.5" CFast hard drive kit)
Content: 2.5" CFast card hard drive kit with black color bracket, user guide. (Require removing the circuit board from the bracket to install or replace the CFast card. Good for permanent and secure media installation.)
Price: 24.95
AD25M2SSD (2.5" M2 Flash drive kit (black))
Content: 2.5" M2 (NGFF) SSD drive kit (black color)

Price: 24.95
AD25MSD (2.5" mSATA flash hard drive kit)
Content: 2.5" mSATA SSD hard drive kit.
Price: 24.95
AD25CFD (2.5" CF hard drive kit)
Content: 2.5" CF card hard drive kit with black color bracket, user guide. (Require removing the circuit board from the bracket to install or replace the CF card. Good for permanent and secure media installation.)
Price: 26.95
AD18M25S (1.8" micro SATA - 2.5" SATA HDD adapter)
Content: 1.8" micro SATA - 2.5" SATA HDD adapter,
Price: 19.00
AA25SEMBK (Slim SATA SSD 2.5" HDD adapter)
Content: 2.5" HDD adapter kit for slim SATA embedded SSD, user guiode
Price: 19.00