1:4 HDD/SSD High-Speed Duplicator

About the 1:4 HDD/SSD Duplicator Series

The latest Addonics 1:4 HDD (Hard Disk Drive) Duplicator can copy as many as 4 target drives from a single source, making this the ideal solution for production or data distribution applications. Addonics 1:4 HDD duplicator operates totally as a stand-alone. There is no computer needed or complex software to operate. Set up is accessed via an LCM control panel on the front of the unit. Once configured, simply insert up to four (4) hard drives of equal or larger capacity than the master drive into the duplicator, load the master hard drive, lock the drive door and push the start button to start the copying process.

About This Model:

This 1:4 HDD/SSD High-Speed duplicator with integrated Snap-In Mobile Rack allowing hard drives to be easily added or removed from the system just like an ordinary cassette tape. The duplicator is built on a chassis with the smaller footprint and lower power consumption.  2.5" SATA HDD/SSD can also be used in this duplicator using the following optional Addoincs 2.5" - 3.5" drive adapter AA25-35DA.

Front view   Rear view


3.5" SATA hard drive or 2.5" SATA hard drive using the 2.5" - 3.5" drive adapter (Snap-In 25) are added directly into each drive bay without any special tool.


Turning the duplicator into a 1:8 2.5" HDD/SSD Duplicator

By using the optional Snap-In 25 RAID and set it to RAID 1, you can double the copying capacity to eight (8) 2.5" HDD/SSD.

Note: The two hard drives shown above are for illustration purpose and are not part of the product

  • Copy or duplicate up to four (4) 3.5" HDD at a time
  • Great for cloning hard drives, making back up hard drives, system upgrade, and data distribution
  • Maximum copying speed up to 120 MB/sec. Actual performance depends on the speed of the drive.
  • Support 2.5" SATA HDD/SSD using the following optional Addoincs 2.5" - 3.5" drive adapter AA25-35DA
  • Drives are added into or removed directly from each drive bay without any special tool
  • Support any type of file format
  • Maximum drive size - no known capacity limit
  • Drive sanitizing:
    • Quick ERASE - remove data and partition table only. Data may still be recoverable using special software.
    • Full ERASE - HDD duplicator sends a WIPE command to the hard drive. This command fills 00 string to entire HDD
    • DoD ERASE - overwrites a string of pattern over the entire disk three times according to DoD 5220.22-M sanitizing standard
  • LCM control module provides a rich set of robust advanced configuration options (click Full LCD console feature list to see a complete list of this duplicator functions)
  • Optional Snap-In 25 RAID to expand the copying capacity to eight (8) 2.5" HDD/SSD
  • Operate as a stand-alone appliance. No computer or software needed

The speed here is for reference only. The speed was measured basing on using 3.5" SATA III 250 GB hard drive for both source and target. The transfer rate varies depending on the speed of the source and destination drive.

  • Writing mode: Sector to Sector
  • Maximum copying speed up to 120 MB/sec. Actual performance depends on the speed of the drive.
  • Sturdy metal frame construction
  • Snap-In Disk Array for quick insertion or removal of drive without a special tool
  • LCD display with a functional control panel
  • Well ventilated for efficient air flow.
  • Low noise high CFM ball bearing cooling fan
  • Integrated 340W 110/240V AC/DC power supply
  • Dimensions (W x D x H): 7.5 x 16 x 10.4 inch (190 x 406 x 264 mm)
  • Weight: 17.2 lb (8.8 Kg)
  • Operating temperature and humidity: 0 - 60 degree C, 15% - 90% RH
  • Storage temperature and humidity: (- 20) - (65) degree C, 0% - 95% RH non-condensing


HD4SNH - (1:4 HDD/SSD High-Speed Duplicator)
Content: 1:4 HDD High-Speed Duplicator main unit, one 2.5" to 3.5" drive adapter (AE25SN35SA), power cord, user guide
Price: 719.00


AERD25SN35 (Snap-In 25 RAID)
Content: Snap-In 25 RAID enclosure unit and user guide
Price: 29.00
AA25-35DA (2.5" to 3.5" drive adapter)
Content: 2.5" to 3.5" drive adapter
Price: 13.95