The new family of Addonics Jasper II Duplicator is one of the fastest and most advanced drive duplicators in the market.

High Performance
The Jasper II Duplicator can copy at a rate up to 260 MB/sec, more than twice the performance of most duplicators in the market. Whereas the performance of most duplicators declines with increasing load, the duplication speed on a Jasper II duplicator remains the same regardless of number of drives in the copying process.

Expandable
Unlike traditional duplicator that is designed for a fixed number of targets, the duplicating capacity of a Jasper II Duplicator can be expanded by connecting two units together. So if you have two Jasper II duplicators with 2 targets and 7 targets, you can connect the two units together to turn them into a 1:10 duplicators.

Flexibility
Since the Jasper II Duplicator can be connected together, different type of media can be easily mixed in the duplication. For example, a Jasper II 3.5" drive duplicator can be connected to a Jasper II mSATA SSD duplicator In this set up, a 3.5" source drive can be copied onto 3.5 drive or mSATA card all at the same time.

The scalability and the flexibility in using different media as source and target allows every Jasper II Duplicator to be used in all types of drive duplication and also ensure the longevity of your investment.

About this model

This Jasper II 3SID is a 1:3 high performance and expandable duplicator for 3.5"/2.5" SATA or IDE HDD/SSD. The duplicator makes copies from one to three (3) drives at one time with speed up to 260 MB/sec. Drive is loaded into the duplicator via removable drive enclosure that accomodates both 3.5" or 2.5" drive. Comes with four (4) Diamond SATA enclosures and one Diamond IDE enclosure, the duplicator can be used to duplicate either IDE or SATA drives or a mix of both. The source or target drive can also be either 3.5" or 2.5" SATA or IDE drive. By using Addonics family of 2.5" flash drive kit, this duplicator can also be used to duplicator M2 SATA, mSATA, CFast, CF card, slim SATA SSD or 1.8" SATA HDD/SSD, making this one of the most flexible duplicators in the market. Together with the expandable capability, this duplicator practially fulfills majority of the storage media duplication needs.

Front view	illustration of loading drive into the duplicator			Rear View

• Copy from 1 to 3  3.5"/2.5" SATA or IDE hard drives
• Supports duplicating from SATA to IDE or from IDE to SATA hard drive in either 3.5" or 2.5" form factor. Source drive and target drive can be SATA or IDE, 2.5" or 3.5" in any mix.
• Copy speed up to 260 MB/sec*., more than twice the speed of most duplicators in the market.
  *Actual speed depends on performance of the media⁽¹⁾
• High performance with no performance degradation regardless of number of targets
• Two Jasper II duplicators can be connected together in a daisy chain to expand the number of targets
• Drive is added and removed from the source or target bay, without any special tool, via either a SATA or IDE drive enclosure
• Drive enclosure is designed to support both 3.5" and 2.5" HDD. For installing 2.5" IDE HDD into Diamond IDE drive enclosure, a 44pin - 40pin IDE connector adapter, part # AA25IDE25, is required.
  
• Four (4) SATA drive enclosures, one IDE drive enclosure and one 44pin - 40pin IDE connector adapter are included. The drive enclosure can be used as a source or a target drive.
• Addition IDE drive trays are required in order to copy more than one IDE hard drive
• Includes one eSATA cable (AASATA100C) for daisy chaining
• Optional 2.5" flash drive kit for duplicating M2 SATA, mSATA, CFast, CF card, slim SATA SSD or 1.8" SATA HDD/SSD
• Supports any type of file systems using sector to sector copy
• Can be set up to copy data only for the following supported file systems:
  • Windows FAT 16/32, exFAT, NTFS
  • Linux: Ext 2/3/4,
  • Mac: HFS/HFS/HFSX
• Maximum drive size >4TB
• Drive sanitizing:
  • Quick ERASE - remove data and partition table only. Data may still be recoverable using special software.
  • Full ERASE - HDD duplicator sends a WIPE command to the hard drive. This command fills 00 string to entire HDD
  • DoD ERASE - overwirtes a string of pattern over the entire disk three times according to DoD 5220.22-M sanitizing standard.
• LCM control module provides a rich set of robust advanced configuration options (click Full LCD console feature list to see a complete list of this duplicator functions)
• Operate as a stand alone appliance. No computer or software needed

(1) The speed here is for reference only. The transfer rate varies depending on the speed of the source and destination drive. The slowest drive in the duplication will control the overall performance of the entire duplication

• Writing mode : Sector to Sector
• Maximum copying speed up to 260MB/sec. Actual speed varies depending on the drive performance
• Connectors on back of unit:
  • 2 eSATA ports for daisy chaining -  1 for uptream and 1 for downstream
  • Power cord input socket
• Two Jasper II duplicators can be connected together in a daisy chain to expand the number of targets
• Powerful 32-bit CRC checksum to assure data integrity
• Sturdy metal frame construction
• Snap-In drive bay for easy drive insertion or removal with no special tool
• LCD display with functional control panel
• Well ventilated for efficient air flow.
• Low noise high CFM ball bearing cooling fan
• Integrated 340W 110/240 auto-sense power supply
• Dimensions (W x D x H): 7.5 x 16 x 10.4 inch (190 x 406 x 264 mm)
• Weight: 17.2 lb (8.8 Kg)
• Operating temperature and humidity: 0 - 60 degree C, 15% - 90% RH
• Storage temperature and humidity: (- 20) - (65) degree C, 0% - 95% RH non-condensing