Jasper II 5S

The new family of Addonics Jasper II Duplicator is one of the fastest and most advanced drive duplicators in the market.

High Performance
The Jasper II Duplicator can copy at a rate up to 260 MB/sec, more than twice the performance of most duplicators in the market. Whereas the performance of most duplicators declines with increasing load, the duplication speed on a Jasper II duplicator remains the same regardless of a number of drives in the copying process.

Expandable
Unlike traditional duplicator that is designed for a fixed number of targets, the duplicating capacity of a Jasper II Duplicator can be expanded by connecting two units together. So if you have two Jasper II duplicators with 2 targets and 7 targets, you can connect the two units together to turn them into a 1:10 duplicators.

High-Performance
up to 260MB/sec 
Expandable Flexible

 

 

Flexibility
Since the Jasper II Duplicator can be connected together, a different type of media can be easily mixed in the duplication. For example, a Jasper II 3.5" drive duplicator can be connected to a Jasper II mSATA SSD duplicator In this setup, a 3.5" source drive can be copied onto 3.5 drive or mSATA card all at the same time.

The scalability and the flexibility in using different media as source and target allow every Jasper II Duplicator to be used in all types of drive duplication and also ensure the longevity of your investment.


About this model

This Jasper II 5S is a 1:5 high performance and expandable duplicator for 3.5" HDD. The duplicator makes copies from one to five (5) drives at one time with speed up to 260 MB/sec. Drives are loaded directly into the duplicator with no special tools required. It can also duplicate 2.5" HDD/SSD by using the Addoincs 2.5" - 3.5" drive adapter (AA25-35DA). One 2.5" adapter is included in the package. Additional 2.5" adapters are required for making more copies of 2.5" HDD. The source or target drive can be either 3.5" or 2.5" SATA drive or SSD.

 
Front view Rear view

 


3.5" SATA HDD is added directly into each drive bay without any special tool. 2.5" SATA HDD requires using the 2.5" - 3.5" drive adapter (AA25-35DA). One 2.5" adapter is included in the package. Additional 2.5" adapters are required for making more copies of 2.5" HDD.

  • Great for cloning hard drives, making back up hard drives, system upgrade or data distribution
  • Duplicates from one to five (5)  3.5" SATA hard drives or 2.5" SATA HDD/SSD (requires an optional 2,5" - 3.5" drive converter box)
  • Source drive and target drive can be 2.5" or 3.5" in any mix.
  • 3.5 drives are added or removed directly from the source or target bay without any tool
  • 2.5" drives are added via an Addoincs 2.5" - 3.5" drive adapter AA25-35DAOne of this adapter is included in this model. Addition adapters are required in order to copy more than one 2.5" SATA hard drive
  • Includes one eSATA cable (AASATA100C) for daisy-chaining
  • High performance with no performance degradation regardless of the number of targets
  • Copy speed up to 260 MB/sec*., more than twice the speed of most duplicators in the market.
    *Actual speed depends on the performance of the media(1)
  • Two Jasper II duplicators can be connected together in a daisy chain to expand the number of targets
  • Supports any type of file systems using sector to sector copy
  • Can be set up to copy data only for the following supported file systems:
    • Windows FAT 16/32, exFAT, NTFS
    • Linux: Ext 2/3/4,
    • Mac: HFS/HFS/HFSX
  • Maximum drive size >4TB
  • Drive sanitizing:
    • Quick ERASE - remove data and partition table only. Data may still be recoverable using special software.
    • Full ERASE - HDD duplicator sends a WIPE command to the hard drive. This command fills 00 string to entire HDD
    • DoD ERASE - overwrites a string of pattern over the entire disk three times according to DoD 5220.22-M sanitizing standard.
  • The LCM control module provides a rich set of robust advanced configuration options (click Full LCD console feature list to see a complete list of this duplicator functions)
  • Operate as a stand-alone appliance. No computer or software needed

(1) The speed here is for reference only. The transfer rate varies depending on the speed of the source and destination drive. The slowest drive in the duplication will control the overall performance of the entire duplication

  • Writing mode: Sector to Sector
  • Maximum copying speed up to 260MB/sec. Actual speed varies depending on the drive performance
  • Connectors on back of the unit:
    • 2 eSATA ports for daisy-chaining -  1 for upstream and 1 for downstream
    • Power cord input socket
  • Two Jasper II duplicators can be daisy-chained to increase the number of targets
  • Powerful 32-bit CRC checksum to assure data integrity
  • Sturdy metal frame construction
  • Snap-In drive bay for easy drive insertion or removal with no special tool
  • An LCD display with functional control panel
  • Well ventilated for efficient airflow.
  • Low noise high CFM ball bearing cooling fan
  • Integrated 340W 110/240 auto-sense power supply
  • Dimensions (W x D x H): 7.5 x 16 x 10.4 inch (190 x 406 x 264 mm)
  • Weight: 17.2 lb (8.8 Kg)
  • Operating temperature and humidity: 0 - 60 degree C, 15% - 90% RH
  • Storage temperature and humidity: (- 20) - (65) degree C, 0% - 95% RH non-condensing

PRODUCTS

JD2-5325SN - (Jasper II 5S - 1:5 3.5"/ 2.5" HDD/SSD duplicator)
Content: Jasper II 5S, 1:5 3.5" / 2.5" HDD/SSD High Speed Duplicator main unit, 1 unit 2.5" to 3.5" drive adapter (AE25SN35SA), power cord, quick start up user guide, Jasper II duplicator user guide
Price: 1339.00

ACCESSORIES

AA25-35DA (2.5" to 3.5" drive adapter)
Content: 2.5" to 3.5" drive adapter
Price: 13.95
AD25M2MSA (2.5" M2 / mSATA Flash drive kit)
Content: 2.5" M2 / mSATA flash drive kit with easy media installation or removal design (black color), user guide
Price: 27.95
AD25CFASTD-N (2.5" CFast HDD kit, open end, black )
Content: 2.5" CFast hard drive kit with open end black color bracket for easy media nstallation, user guide.
Price: 24.95
AD25CFD-N (2.5" CF HDD PRO, easy media insertion and removal, black color)
Content: 2.5" CF hard drive kit with a half open-end black color bracket for easy media installation.
Price: 26.95
AD18M25S (1.8" micro SATA - 2.5" SATA HDD adapter)
Content: 1.8" micro SATA - 2.5" SATA HDD adapter,
Price: 19.00
AA25SEMBK (Slim SATA SSD 2.5" HDD adapter)
Content: 2.5" HDD adapter kit for slim SATA embedded SSD, user guiode
Price: 19.00
Datasheets
Jasper II 5S
Applies to: JD2-5325SN

JD2-5325SN

Drivers
Jasper II duplicator firmware
Applies to:

For all Jasper II duplicator except the model JD2P3

Firmware update procedures:

  1. download and unzip the firmware file
  2. copy the firmware file (.BIN file) onto a HDD or SSD formatted in FAT32 (DO NOT USE NTFS or any other file system)
  3. on the duplicator contorl panel, go to Utility/System Update and follow the onscreen instructions